VCV-Rack-Plugins
VCV-Rack-Plugins copied to clipboard
mschack
Minor Feature Requests
-
Add a Freq CV to the Synth Drum Module.
-
Add a random button to the 3xOSC synth for quick alternative sound textures
-
Add a notch filter to the 3xOSC filter section and Ping Pong Delay
-
Seq 3x16/6x32 trigger - have the option to save variable steps with each pattern change or storage. For example, Pattern 1 has four steps, pattern 2 has 8 steps and pattern 3 has 5 or 6 steps. All these can be triggered during a seq'd project. This way it could save space instead of having a different object for different steps and patterns.
Seq 3x16 will have (16x3rd power) steps variations. Seq 6x32 will have (16x*6th power) steps variations.
- Seq 3x16 - add a level cv out for the option to have all16 sliders to control filters, synth drum levels, 3xOSC cv freq, res, and vca. I can hear some wicked modulations with the sliders.
-Adding Freq CV to drums -Random button to 3xOSC is difficult since the way the knobs work they were not meant to be set to a value and actually change position, except when you do a global randomize. I want to add my own knob control soon so I can do what I want with it. -Adding Notch filters -Adding the ability to change the max step with each pattern to the 6x32 sequencer. Can't do it on the 3x16 because right now the max step is global and affects all channels. -You can actually use the V/OCT out of the 3x16 sequencer to modulate parameters. If you need to attenuate the output then use a Befaco Dual Attenuator to adjust the value.
Here is a video link to your latest updates that I had used thus far at https://www.facebook.com/browneditor/videos/10154908218041360/.
Here is my YouTube account link for the the music comp at https://youtu.be/1zYm_TpuMfQ.
Very cool, thanks. Sounds like the cosmic radio tuner :) Hammering the SEQ 3x16 nice to see...
Thanks!!! I will continue to push the envelop on your devices as time goes by.
MSHack,
How can we choose the exact tempo in the Master Clock device? It takes a few seconds just to select 121 from 120. You always wind up with the sub numbers over or under.
The Seq 3x16 has a copy feature from step to step, but what if I wanted to copy step 4 to 8 & 12. Is there a way to do that without painstakingly trying to match each slider and pattern from one step to a skipped step.
How would I be able to copy one pattern to another in the Seq Triad 2 device. I am not seeing a copy like the Seq 3x16. If space is an issue, I can work around it.
Many Thanks, Omar Brown
Use CTRL when turning a knob to do finer increments.
No you can only copy to next on SEQ 3 and the Triad sequencer I actually had the same thing but removed it.
Let me think about how to copy to a specific pattern.
Perhaps hit copy with the current pattern selected and then the next pattern you select it will copy to.