Patrick Gehrsitz

> optimize setting for C920/930e with klipper/crowsnest Klipper has nothing to do with your cam. > Currently it seems crowsnest installer skips camera-streamer install on a rpi5 Even if we...

Forgot to reopen this issue. Can you guys please try to use `--camera-force_active=1` as a custom_flag?

> Where do we set this ? Inside the crowsnest.conf under [custom_flags](https://crowsnest.mainsail.xyz/configuration/cam-section#custom_flags)

Also just as an overall information for this. We couldn't reproduce this. So please attach a debug log next time with the issue reproduced, that we can maybe try to...

@SaltyPaws thank you for the confirmation, that this works for you too. Next time a debug log would be nice. To create one, just set `log_level: debug` inside your config....

@SaltyPaws Just for your information. `--camera-force_active=1` is now set by default, since Crowsnest v4.0.5 released 2 days ago.

We had to remove this parameter from default values as it causes problems with some printers #202 So please set `--camera-force_active=1` again manually inside the `custom_flags`. We are already in...

> Edit: The camera has just gone offline again, I've restarted crowsnest and its blank. Unsure what happened, crowsnest logs look fine. Going to try [this solution](https://old.reddit.com/r/klippers/comments/13p82ff/crowsnest_update_video_gone/jlbbcia/) and see how...

@recrudesce Ofc the rtsp will break down too. Both are provided by camera-streamer. You don't have uploaded your log yet? Does this kernel panic happens as soon as it breaks...

I recommend to remove that parameter again. Your camera-streamer is restarting every 20s. So you are one of the unlucky ones where this doesn't help.