Default settings knock out cameras

[sgtstadanko]

Hey all. I am using the default docker settings with about 9 wyze cams (2 outdoor, 1 flood, 1 doorbell and 4 v2 with RTSP fw). When running this docker the stream views through the webui and VLC/rtsp is spotty at best and after about 10 minutes they even stop working in the wyze app as well and i end up having to manually power cycle to get them to work at all.

Is there some sort of setting overall that can be tweaked or is there a way to just limit it to a set of camera. Specifically the outdoor , doorbell and floodlight camerass which dont work with RTSP firmware?

[mrlt8]

You could try filtering in or out certain models or specific cameras.

You may also need to tweak some of your network settings to stream from multiple cameras.

[maxfield-allison]

also curious what kind of networking hardware you're running as well as the distance from your AP's to the cams. might be some useful info in #891

[sgtstadanko]

Eero pro 6 mesh. I ended up shutting down the docker because it was hosing my cameras also in the wyze app, even after limiting it to 4 cameras (the ones that won’t run the rtsp firmware). All cameras are well within the footprint of the mesh. The furthest being maybe 30 feet from the closest ap.

[mrlt8]

Are there any multicast or IGMP setting you can adjust?