Miguel Risco-Castillo

M48 should be done at the same position where the errors are occurring, the deviation is not the real accuracy because if one of the measurements is out of the...

I don't have a S1, that's why that error is difficult to reproduce and fix for me. But I have reports from other S1 users that don't have errors, maybe...

> I also am noticing an issue with the CR-Touch. I find that probing isn't accurate and the results are jumping around by .02 +/- deviation. You can really notice...

The next version will allow to edit the multiple probe value.

> on this line in creality's S1 firmware, they have BLTOUCH_DELAY configured. This may cause some differences? > > https://github.com/CrealityOfficial/Ender-3S1/blob/main/Marlin/Configuration_adv.h#L771 If you don't define a delay there is a default...

> > > on this line in creality's S1 firmware, they have BLTOUCH_DELAY configured. This may cause some differences? > > > https://github.com/CrealityOfficial/Ender-3S1/blob/main/Marlin/Configuration_adv.h#L771 > > > > > > Could...

Hi, thank you for your feature request. Currently, adding support for the Laser unit to Professional Firmware requires some work and time. I hope that someone can do a pull...

The Sources for the official firmware with laser module are here: https://github.com/CrealityOfficial/Ender-3S1/tree/ender-3s1-lasermodel We must port the Laser code without affecting the core Marlin code.

Also you can check here: https://github.com/mriscoc/Marlin_Configurations/issues/2

> I will digg deeper in this topic. Can you explain, how I change the machine type in the Marlin auto build tool? I think I was building for the...