Temperatur 0 after Temp is in Top

[gorillale]

• i set Temperatur Bed and Hotend
• after i print a model
• the temp will be up on top
• when printing starts, both temp goes to 0
• printing with 0 temp not work

I print with cura to repetier-server pro to the creality ender 3 v2 blt 4.2.2

Mriscoc Version 4.2.1 ender 3 v2 blt

[mriscoc]

Check your start and end g-code, also verify if you can mimic the g-code scripts of Octoprint https://github.com/mriscoc/Ender3V2S1/wiki/Slicer-G-code-Scripts https://github.com/mriscoc/Ender3V2S1/wiki/Octoprint#octoprint-gcode-scripts

[gorillale]

thank you, but i have this settings. Not known where make this temp reset... After is print/send Cura print to the repetier on ender. After 1 min. i close cura then this error come. When i not close Cura, ther is no error. All code ist send before to repetier and i not known how is the problem.

I will be ask repetier for this problem. thank you.

[mriscoc]

Is there any news about this?

[github-actions[bot]]

This issue has had no activity in the last 60 days. Please add a reply if you want to keep this issue active, otherwise it will be automatically closed within 10 days.

[gorillale]

You can close please, never see this. I have updated Cura to 5.3.0 and newst Repetier. Thank you fpr your work. Regards

[github-actions[bot]]

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.