Manuel comments

Results 169 comments of


                                            Manuel

Random min/max cell voltages go very high or very low in a single read.

I'm not using the BLE connection and most of the users don't track the values in Grafana. So I do not saw this behavior.

Random min/max cell voltages go very high or very low in a single read.

Can you try with `v1.3.20240524dev`?

Random min/max cell voltages go very high or very low in a single read.

Which values do you see? I limited them to be => 1 V and

Random min/max cell voltages go very high or very low in a single read.

Theoretically there is checksum to verify integrity. https://github.com/Louisvdw/dbus-serialbattery/blob/59a6d00c096c3e708aaf9cd827275c6500450374/etc/dbus-serialbattery/bms/jkbms_brn.py#L375-L379

Random min/max cell voltages go very high or very low in a single read.

It could also be a faulty BMS or the connection to the VMR portal. Do you also log the values on a local InfluxDB? You could try that

Random min/max cell voltages go very high or very low in a single read.

> I limited them to be => 1 V and

Random min/max cell voltages go very high or very low in a single read.

Just open a PR and I wil llook through it. Please open the PR in my repository, this will make things easier.

Using SEPLOS V3 CVL in config.ini seems to be ignored

1. Are you sure this is whole config file? 2. Please provide the logs in the correct format. Also it seems that your battery does not provide logs after reboot....

Using SEPLOS V3 CVL in config.ini seems to be ignored

@marcelrv maybe you know why this is the case that CVL is not the calculated one?

Using SEPLOS V3 CVL in config.ini seems to be ignored

@marcelrv thank you for helping out. @HF-SPSler comment out these lines and it should work: https://github.com/Louisvdw/dbus-serialbattery/blob/59a6d00c096c3e708aaf9cd827275c6500450374/etc/dbus-serialbattery/bms/seplosv3.py#L210-L211