Matt Redfearn

@ministryofsillywalks ah - well I also fell into this bug: https://github.com/home-assistant/core/issues/56392#issuecomment-926429118 which resulted in the battery discharged entity not showing up in the energy dashboard, whereas the battery charged one...

@ministryofsillywalks did you change it's device class to "energy" and state class to "total increasing"?

@KoenDTS I have a 2019 "fat" e-tron - yes the charging service works for me and I am able to change charging mode to immediate charging or timer charging (same...

The documentation for the export control site limit register  says that it is a float32 with value 0 - max site power - so you cannot set a negative...

Yeah I think if you set bit 11 in the export control mode register, you would be able to set a negative limit. However, it sounds like you're trying to...

> Has this been abandoned. I have 2 inverters, each with a battery and 2 strings of PV. My modbus ids are also non-consecutive, in fact, I believe that slave...

This is still an issue in 2023.3. The source of the problem seems to me to have been correctly identified by @kaitlinsm as the aggregation function that is applied does...

You need to create the correct set of templated sensors for your particular system set up (see above link to wiki). The raw sensors that the inverter / meters provide...

`number.solaredge_storage_ac_charge_limit` is for controlling the amount the storage can charge from AC *anually* - see the documentation of register 0xE006 on page 17 of this document https://github.com/WillCodeForCats/solaredge-modbus-multi/blob/main/doc/Power-Control-Open-Protocol-for-SolarEdge-Inverters.pdf. If you want...

Nope, unfortunately this is a limitation of the (published) modbus register specification from Solaredge. There is no third battery in the specification and therefore it is impossible to support.