gmonitor
gmonitor copied to clipboard
gmonitor is a GPU monitor (Nvidia only at the moment)
What is gmonitor?
This is a GPU monitoring program, it monitors the core usage, VRAM usage, PCI-E & memory bus usage and the temperature of the GPU. I write CUDA programs and always needed a way to monitor how they behave in real time, searched for an MSI afterburner like programs on GNU/Linux systems but couldn't find any, so I decided to put this together and have been using it for quite some time now. Though this is quite minimal, it's good enough for what I needed it.
Running environment:
This has been developed and used in a machine running Ubuntu, I have not tested it in any other systems.
Requirements:
At least one NVIDIA GPU, this only supports NVIDIA GPUs for now as I only needed this to monitor my CUDA programs. Support for AMD/Intel cards might come in the future if needed, feel free to add them as well.
This program probes the NVIDIA drivers for statistics through nvidia-settings, make sure the NVIDA drivers are properly installed on your system.
CUDA install:
Follow Nvidia CUDA install guide to install CUDA on your machine, If you face issues with the nouveau driver, try this Nouveau workaround.
Building from Source:
Configuring with CMake
Compile and install gmonitor in /usr/local/bin
$ cd gmonitor
$ mkdir build
$ cd build
$ cmake ..
$ make
$ sudo make install
Usage:
Download the executable from the latest release or compile your own from the source code in the folder "src", run the executable with the following arguments:
-d [displayMode]
0 (default) Monitor both current and previous GPU states.
1 Monitor most recent GPU state only.
2 Monitor previous GPU states only.
3 Same as 0, print current states for all GPU then print history.
-g [gpuNumber]
GPU numbers to monitor, primary GPU's number is 0...
-r [refreshRate]
Monitoring refresh rate (default is 2 seconds).
-o
Enable support for Optirun.
-s
Needed if you are running over ssh.
-h
Display this menu.
Examples:
Use defaults
gmonitor
Monitor the most recent state only for the first and third gpu.
gmonitor -d 1 -g 02
Monitor current and history states for 4 GPUs.
gmonitor -d 0 -g 0123
Monitor both current and previous states for all GPUs, refresh every 3 seconds.
gmonitor -d 0 -r 3
Limitations:
This only supports Nvidia cards at the moment and support for other cards might be added in the future. Multi GPU support have not been tested, it should scale and work with any number of available GPUs but I have not tested it myself as I only have one card.