motioneyeos
motioneyeos copied to clipboard
rebooting after brief connection.
Preliminary Docs
I confirm that I have read the CONTRIBUTING guide before opening this issue.
I confirm that I have read the FAQ before opening this issue.
motionEyeOS Version
I am running motionEyeOS version: motioneyeos-raspberrypi-dev20201026.
Board Model
I am using the following board/model: Raspberry PI Zero W.
Camera
I am using the following type of camera: Raspberry Pi NoIR Camera Module V2 - 8MP 1080P30.
Network Connection
My motionEyeOS unit is connected to the network via: WiFi
The problem I am having right now: Everything worked fine for a little bit, then after a few seconds, the system rooted itself again. The code in my wpa_supplicant.conf file is below:
country=US update_config=1 ctrl_interface=/var/run/wpa_supplicant
network={ scan_ssid=1 ssid="xxxxxx" psk="yyyyyy" }
Can someone help me resolve this issue? How can I stop it from rebooting after the browser has successfully connected to the IP address?
https://user-images.githubusercontent.com/62785162/212583216-77e9b66a-4ef8-483f-ba9c-196fb0f2b276.mp4
@starbasessd hi, sorry to bother you, but I wonder if you could help me with this issue? Thank you very much in advance!
Please post the motioneye.log & messages.log. If they are large, you can ssh or console in and run: logrotate -f /wtc/logrotate.conf and then post the logs after the next reboot You can also post the results of the command vcgencmd get_throttled
I'd guess it's either a low power problem or a high thermal problem...