vcgencmd get_camera showing not supported=0

[SureshkumarSenthilkumar]

Preliminary Docs

I confirm that I have read the CONTRIBUTING guide before opening this issue.

I confirm that I have read the FAQ before opening this issue.

motionEyeOS Version

I am running motionEyeOS version: (insert your version here, e.g. 20180314).

Board Model

I am using the following board/model: (insert your board model here, e.g. Raspberry PI 4 B).

Camera

I am using the following type of camera: CSI camera module(choose from V4L2, MMAL, Network Camera, Fast Network Camera and Simple MJPEG Camera).

My camera model is: Raspberry Pi camera Rev 1.3 (insert your camera model, e.g. Logitech C290).

Network Connection

My motionEyeOS unit is connected to the network via: Internet(choose your network connection, e.g. WiFi, Ethernet).

Peripherals

I am using the following peripherals that I consider relevant to this issue:

• (e.g. USB WiFi adapter)
• (e.g. External Hard Disk)

Log Files

I consider the following log files relevant to this issue:

• (attach e.g. motioneye.log)
• (attach e.g. boot.log)

[starbasessd]

If you install RPiOS Buster (Legacy) on the SDCard, what does vcgencmd get_camera report?

[SureshkumarSenthilkumar]

If you install RPiOS Buster (Legacy) on the SDCard, what does vcgencmd get_camera report?

Supported=1, connected=1 when I connect csi camera onboard