NoIR Unable to Open Video Device

[jammininmypjs]

trafficstars

Preliminary Docs

I confirm that I have read the CONTRIBUTING guide before opening this issue.

I confirm that I have read the FAQ before opening this issue.

motionEyeOS Version

I am running motionEyeOS version: 20200606

Board Model

I am using the following board/model: RPI Zero W

Camera

I am using the following type of camera: NoIR

My camera model is: v2.1

Network Connection

My motionEyeOS unit is connected to the network via: wifi

Peripherals

I am using the following peripherals that I consider relevant to this issue:

N/A (unless Samba shares count? In which case it's a WD My Book)

Log Files

I consider the following log files relevant to this issue: motion.log motioneye.log boot.log

I saw a similar issue open in motioneye, but not here. I am able to add the camera as a V4L2 device, but not MMAL. I've tried two different cables and I used to use this camera so it should work. Could the camera need enabled on the pi or something? Or should I just get a new camera

[starbasessd]

In motionEyeOS it's automatically enabled, and should self install. The Black or blue side of the cable goes away from the board. If you can ssh into it, run the command: vcgencmd get_camera and report the result here.

[starbasessd]

BTW, any CSI camera is going to be a MMAL camera.

[jammininmypjs]

supported=1 detected=0 Ah so looks like perhaps a new cable or camera since it's just not being detected

[starbasessd]

Or cables aren't connected correctly.

[jammininmypjs]

Nah I've tried disconnecting and reconnecting a couple times and made sure theyre facing the right way. I'll test with a cable I know works and see what happens. Thanks!