motioneyeos icon indicating copy to clipboard operation
motioneyeos copied to clipboard

Raspberry Pi 4 - Overlock 2147

Open bobster316 opened this issue 4 years ago • 8 comments

Is it possible to overclock the raspberry pi 4 4gb to 2147, i currently run at 2000 without any problems, if i increase to 2147 the pi fails to boot.

I am trying the following parameters in the config file

gpu_freq=750 arm_freq=2147 over_voltage=6

If i reduce the arm_freq=2000 the system boots up okay.

bobster316 avatar Jan 17 '20 10:01 bobster316

Any updates please...

bobster316 avatar Jan 29 '20 17:01 bobster316

Ive seen a few videos of people upgrading their Pi 4's to overlock to 2147 using the latest firmware. Are there any plans to update motioneyeos ?

bobster316 avatar Feb 17 '20 14:02 bobster316

Yes! Let's have the current prerelease validated and turned into a stable release. Then we'll do an upgrade of everything, from BuildRoot to all kernel & firmware versions.

ccrisan avatar Feb 17 '20 14:02 ccrisan

Would there be necessarily a performance boost on the Pi4?

Another q: Can we get a "Manual" time / date option for not connected PIs? In addition to HTTP, NTP, and SNTP?

On Mon, Feb 17, 2020 at 9:07 AM Calin Crisan [email protected] wrote:

Yes! Let's have the current prerelease validated and turned into a stable release. Then we'll do an upgrade of everything, from BuildRoot to all kernel & firmware versions.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2265?email_source=notifications&email_token=AEZTUHNP66VVPVDENNSMQ63RDKK2NA5CNFSM4KIGFXT2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEL6Q74A#issuecomment-587010032, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEZTUHPKF2O6FK3ZVCKCVUTRDKK2NANCNFSM4KIGFXTQ .

-- Thanks

Kevin Shumaker

Personal Tech Support https://kevinshumaker.wixsite.com/thethirdlevel

N38° 19' 56.52" W85° 45' 8.56"

Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

starbasessd avatar Feb 17 '20 14:02 starbasessd

@starbasessd

Another q: Can we get a "Manual" time / date option for not connected PIs? In addition to HTTP, NTP, and SNTP?

You could create a new issue and we can have the discussion in the thread.

This is quite easy to implement, but I question how useful it is. A button that triggers ntpdate might be more useful?

jasaw avatar Feb 18 '20 00:02 jasaw

For stand alone - non internet connected motionEyeOS RPi's. I've helped several users create the https://github.com/ccrisan/motioneyeos/wiki/WiFi-Access-Point

On Mon, Feb 17, 2020 at 7:11 PM jasaw [email protected] wrote:

@starbasessd https://github.com/starbasessd

Another q: Can we get a "Manual" time / date option for not connected PIs? In addition to HTTP, NTP, and SNTP?

You could create a new issue here and we can have the discussion in the thread.

This is quite easy to implement, but I question how useful it is. A button that triggers ntpdate might be more useful?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2265?email_source=notifications&email_token=AEZTUHP4HGBCPUAL27RH4YLRDMRUFA5CNFSM4KIGFXT2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEMAB7OY#issuecomment-587210683, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEZTUHNHFPAJWHWN5ET7M33RDMRUFANCNFSM4KIGFXTQ .

-- Thanks

Kevin Shumaker

Personal Tech Support https://kevinshumaker.wixsite.com/thethirdlevel

N38° 19' 56.52" W85° 45' 8.56"

Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

starbasessd avatar Feb 18 '20 00:02 starbasessd

Done. #2297

On Mon, Feb 17, 2020 at 7:11 PM jasaw [email protected] wrote:

@starbasessd https://github.com/starbasessd

Another q: Can we get a "Manual" time / date option for not connected PIs? In addition to HTTP, NTP, and SNTP?

You could create a new issue here and we can have the discussion in the thread.

This is quite easy to implement, but I question how useful it is. A button that triggers ntpdate might be more useful?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2265?email_source=notifications&email_token=AEZTUHP4HGBCPUAL27RH4YLRDMRUFA5CNFSM4KIGFXT2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEMAB7OY#issuecomment-587210683, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEZTUHNHFPAJWHWN5ET7M33RDMRUFANCNFSM4KIGFXTQ .

-- Thanks

Kevin Shumaker

Personal Tech Support https://kevinshumaker.wixsite.com/thethirdlevel

N38° 19' 56.52" W85° 45' 8.56"

Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

starbasessd avatar Feb 18 '20 00:02 starbasessd

No comments after more than 60 days. If you are still having issues, please open a new issue.

starbasessd avatar Jan 19 '22 18:01 starbasessd