Moonglow
Hi Pete! > There is a 2 pin connector in the head loom that is hidden away under the wrap and one of the crimps had failed! So... it was...
>My first guess its that the PWM isn't being setup right especially as I can't get a good reading on my multimeter - it varies all the time Thats a...
Hi @Xan125 ! - Which printer model you have ? - Cura is working perfectly on Marlin firmware i ( and many others ) use it as our main slicer,...
>but nothing comes out. Please check direction of extruding try to manual load and unload filament. Looks like your machine has an inverted extruding direction, please refer to that page...
Hi! My plans is goes to port latest Marlin branch, but i have no time to port all modification to it and test for all platforms. p.s: what about Klipper...
>I might try to see if I can get MKS_UI to run using the internal SD for storing the files needed for that UI build instead of needing the SPI...
Hi @Skmark ! Sorry, but that project is for education purpose only and there no source code provided, because it can be used for some evil or illegal commercial things...
@P208PUG It is not possible due lack of needed USB endpoints in USB FS mode ( used by default by vag hex ), without hardware modification ( we need to...
@P208PUG [reference hardware](https://github.com/moonglow/pcan_pro_x/issues/1) i use it as my base hw setup.