Muhammad AL-Qadhy

> Sorry for my late response, I was a bit busy for a while... > It is ok nothing to worry about > If the stock U-Boot can boot OpenWrt...

Sorry for my late response, I got a stock device with original uboot > > If the stock U-Boot can boot OpenWrt image just with an env variable change, that...

Here are parts of Original Boot log. it might help suggesting changes to dts file. ``` flash manufacture id: ef, device id 40 18 W25Q128BV(ef 40180000) (16384 Kbytes) mtd .name...

full boot log ``` ## Booting image at c03f0000 ... raspi_read: from:7f0000 len:40 Image Name: Linux Kernel Image Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 2097088 Bytes...

running ifconfig on original firmware ``` ifconfig apcli0 Link encap:Ethernet HWaddr 18:53:E0:31:92:DC UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0...

> That's nice, have you backed up the whole flash for the stock firmware? > I Downloaded the MTD0-MTD1-MTD2 from webgui > The spi freq should be tested after boot...

@brada4 thank you for your contribution, iptables-zz-legacy is for coovachilli to work. and i have other devices that uses different wireless driver never faced this issue. such as DW02-412H, running...

@brada4 Yes you are correct, i checked back then and found packages that depends on nft but i cannot recall them now. in 2 days i will be back and...

@trunneml i compiled my own snapshot and crashes are much less now, but still happening @brada4 offered an approach for removing nft totally but there are dependencies i cannot remove...

@brada4