[Magic CLI]: Invoking REPL returns DW_Form warning

[DWSimmons]

Issue description

Inside a project environment and shell, running mojo REPL returns warning (github code copy icon is covering the last part which reads "0x1e", if you slide the bar AND hold the cursor down on the slide, the code copy button will not show)

warning: (x86_64) /media/darin/M2/magic/lidar/.magic/envs/default/lib/libstdc++.so.6 unsupported DW_FORM value: 0x1e

I'm including the following because the internet said to...

ldd --version
ldd (Ubuntu GLIBC 2.35-0ubuntu3.8) 2.35

Also just in case

Architecture: x86_64
  CPU op-mode(s): 32-bit, 64-bit
  Address sizes: 43 bits physical, 48 bits virtual
  Byte Order: Little Endian
CPU(s): 16
  On-line CPU(s) list: 0-15
Vendor ID: AuthenticAMD
  Model name: AMD Ryzen 7 1700 Eight-Core Processor
    CPU family: 23
    Model: 1
    Thread(s) per core: 2
    Core(s) per socket: 8
    Socket(s): 1
    Stepping: 1
    Frequency boost: enabled
    CPU max MHz: 3000.0000
    CPU min MHz: 1550.0000
    BogoMIPS: 5988.48
    Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_
                         tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand l
                         ahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx c
                         pb hw_pstate ssbd ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt sha_ni xsaveopt xsavec xgetbv1 clzero irperf xsaveerptr arat npt lbr
                         v svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif overflow_recov succor smca sev

on ubuntu 22.04.04

REPL works like it always does.

Steps to reproduce

• Include anything else that might help us debug the issue. I did a modular clean and uninstall so I don't have a base max/mojo version to verify if this exists on as well, sorry.

Version Info

magic 0.1.1