Gray

And also on the fan controller and RTC! I think I was misunderstanding what i2c was being used for in the CSI connectors. Thanks for helping me understand. Thinking about...

100% on the KISS approach. :)

The connection for the RTC is by i2c, as is a fan controller (at least on the I/O board, but we should probably copy that). i2c is a shared bus,...

I wouldn't want to run CSI out of a case with something like a HDMI connector, for the same reason you don't want a 40 pin port if it's not...

To be fair, even my "I want i2s for HDMI audio capture" argument is as simple to solve as sticking a jumper or dip block on the board to route...

Agreed. One thought I had was just to use a (picking a random number) 60 pin header with a few rows of pins removed to make a clear separation -...

I previously had the same thought, @funkyguy4000 - but - if the 40-pin connector is aligned properly, a card with a female header block soldered to it and a standard...

Simplest answer would just be to have them on a header adjacant to a ground pin - that way they can be jumpered where they are, or put on a...

Yes. We're (by which I mean @TheGuyDanish ) is already working on that, but hardware hasn't arrived yet to see how the power enable and reset pins behave under different...

Just to summarise - I don't think we're looking to add a "shutdown key" in the sense of the ACPI "if you press this key, the system will exec `shutdown...