EnragedRabbitProject icon indicating copy to clipboard operation
EnragedRabbitProject copied to clipboard
Published 1 year ago • verified publisher icon mneuhaus

ServoArm tends to wear out

Open mneuhaus opened this issue 2 years ago • 3 comments

The ribbed hole for the ServoArm tends to wear out, better would be a design, where an original servo arm is added/emmbedded becaus those nylon won't fail so easily

mneuhaus avatar Feb 26 '23 22:02 mneuhaus

This one would be a big improvement but would need two variations:

  1. MG90S servo
  2. Savox Servo

They have different size "arms". Also there is a really good idea of using a tiny screw to reinforce the "pusher" part of the arm. Perhaps alignment would be possible to have this strengthening screw also lock the end of the nylon servo arm in place.

moggieuk avatar Feb 27 '23 05:02 moggieuk

@moggieuk Which Savox exactly would that be?

Yea, either an additional screw or instant glue to fix it in place, since ERCF is outside of the heated chamber the super glue should also hold up decently

mneuhaus avatar Feb 27 '23 13:02 mneuhaus

Sorry, I wasn't watching. It's the Savox SH-0255MG. That model is not discontinued but the replacement has exactly the same footprint.

Spline size: 21T Spline (MG-90s are 20 spline I believe).

moggieuk avatar Mar 18 '23 14:03 moggieuk