Michael McCool

I did enable debug logging, and just reloaded it. Let me check if it's crashed yet... nope, still working. Will do so after it crashes. I had an older log...

So as an additional observation I have seen errors about the NCP failing to respond, watchdog failure, etc. and then I see it enter an "Initialization" state on its own,...

Ugh, it finally crashed but the debug log was still too big to upload (over 400MB!). It seems it appended to my old log rather than start a new one,...

[home-assistant_zha_2023-12-11T18-57-42.214Z-trimmed.log](https://github.com/home-assistant/core/files/13639895/home-assistant_zha_2023-12-11T18-57-42.214Z-trimmed.log)

For the log, I did NOT manually reload it. For each of those five instances it entered the "Initialization" state on its own and restarted on its own. It succeeded...

I should also say I have a fair number of Zigbee devices: 49 devices, 376 entities. However, not so sure it's a bottleneck issue as it worked ok until recently...

> https://github.com/sebirdman/m5paper_esphome > > Things are generally functional. There's some interesting changes that will have to happen to make the esphome spi component work with the display, so there's a...

To be honest this does not annoy me as much as another zigbee "illuminance" sensor I have that actually just returns an uncalibrated brightness (as a percentage) - but was...

Also for the record, here is the sensor Weatherflow is currently using. It combines ambient and UV measurements. However, they also calibrate it against other data measured nearby (to account...