mmN83

Hello rzulian, Thank you for your integration. My set-up will be a little different including 3 x single phase inverters (one for each phase and in master-slave configuration). Two of...

That is exactly my goal (plus battery readings). Can you share your integration configuration? Thank you!

Thank you both for your clarification. In summary a configuration like the one below should fit my needs (3 inverters to be read): solaredge_modbus: name: 'SolarEdge Modbus' host: XXX.XXX.XXX.XXX port:...

Hi Luckymoep, Can you share document/source where you have found the registers map including the battery status?

[battery_sensor.zip](https://github.com/erikarenhill/solaredge-modbus-hass/files/5711954/battery_sensor.zip) Finally something that seems to work. I have not a battery attached to my inverter yet so I kindly ask you if you can do some test on the...

Did you manage to perform some tests?

 This is what I get from my inverter polling on 62836 as starting address. My inverter is an SE6000H (with LCD display). It correctly reports ModBus connection active by...

Nope, I don't know how to do It. I saw that your config. should makes use of CAN between battery and storedge interface and this could be the tricky point....

Hi, Let me understand, have you implemented what included in the package I released and it went fine by changing the endian type? I ask since I'm still waiting for...

Thank you @mkrasselt1. My batteries are installed but still not connected :( I Hope to get back soon on the topic.