kills my inverter connection

[ghost]

I have used this integration a lot. and it seems that newer version now cause the inverter connection to die and the sensors become unavailable.

I will take some time to test which version last worked fine for me, but my GoodWe SBP inverter can no longer use this integration as is.

I have the Wifi kit and the LAN kit.. (got the LAN kit recently as I thought the problem was wifi module - but turns out to be this integration)

the problem is that the inverter stops sending data to HA and to SEMS.. but I can still log into the inverter admin page and change those settings.

The only fix is to completely shut down the entire inverter and restart. After this SEMS and HA work again..but not for long.. soon enough they both stop working again.

I have disabled this integration for 2 weeks, and the inverter and SEMS data have been working fine.. and last night re-enabled this integration and soon enough all the data has stopped working again.

This integration must be transmitting a code to the inverter that the inverter is not liking and is causing the problem.. When I get a chance I will start to send the codes on by one from the newer integration code to see what changed from when this integration once worked fine, somewhere back around v0.9.9.3 ish

I see other issues reported here that are seeing similar results in the integration, so would be good to hear from some other users if they have seen and tried what I have done in the last month