Can not install by upip

[iBobik]

trafficstars

In just installed and connected ESP8266 4MB:

>>> import network
>>> sta_if = network.WLAN(network.STA_IF)
>>> sta_if.active(True)
#6 ets_task(4020f474, 28, 3fffa018, 10)
>>> sta_if.connect('xxx', 'xxx')
>>> sta_if.ifconfig()
('192.168.0.192', '255.255.255.0', '192.168.0.1', '213.46.172.37')
>>> import upip
>>> upip.install('micropython-wifimanager')
Installing to: /lib/
Warning: pypi.org SSL certificate is not validated
Installing micropython-wifimanager 0.3.3 from https://files.pythonhosted.org/packages/ab/bf/5f896441ca23c794fc7011f5429a04b44018a686789d592cf8d9911afd1a/micropython-wifimanager-0.3.3.tar.gz
Error installing 'micropython-wifimanager': [Errno 22] EINVAL, packages may be partially installed
>>> 

[iBobik]

Could be relevant, but I do not understand it :-)

>>> import gc
>>> gc.mem_free()
24112
>>> import micropython
>>> micropython.mem_info(1)
stack: 2128 out of 8192
GC: total: 35968, used: 12064, free: 23904
 No. of 1-blocks: 90, 2-blocks: 21, max blk sz: 264, max free sz: 514
GC memory layout; from 3ffef550:
00000: MDLhhhMASDDhhDSB=BBBh===h====BBShh==BhB=BhBBBDhBBB=h=hh=hBh=hBhh
00400: =hB=BBBBh=h====h===h=h=h===ShShSh=======hShhh=T=hMDBD.h==...h=.B
00800: hTT.D.Dh==h==.BBBB=Bh==h===...hh=h===DBSB=BBBh==h===h===h====h==
00c00: =============================h=.h==h=Bh..h==h====h=...h=h=======
01000: ===========.........S..Lh...Lhh======........MD..BBBB..h===...h=
01400: ================================================================
01800: ================================================================
01c00: ================================================================
02000: ================................................................
02400: ......h=========================================================
02800: ================================================================
02c00: ================================================================
03000: ================================================================
03400: ==============..................................................
       (7 lines all free)
05400: ................h=====..........................................
       (6 lines all free)
07000: ..............................................................hT
       (6 lines all free)
08c00: ........

[mitchins]

Sorry I had notifications turned off somehow! That's curious, I will dig out an ESP8266 and try it.. usually this error means it has run out of memory, but this is a tiny project. The other possibility is you've done a bunch of stuff and need to reset the device to free up memory.

[iBobik]

It could be also by some setting on gzip what by default requires buffer bigger than ESP8266 usually have.

Jan Pobořil https://honza.poboril.cz/

4. 2. 2019 v 10:49, Mitchell Currie [email protected]:

Sorry I had notifications turned off somehow! That's curious, I will dig out an ESP8266 and try it.. usually this error means it has run out of memory, but this is a tiny project. The other possibility is you've done a bunch of stuff and need to reset the device to free up memory.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or mute the thread.

[mitchins]

I'm about to create a new minor release... I'll give it a check then. Should be using standard OSX zip parameters, but I'll see what the changes are possible.

[iBobik]

I found info about this requirement (dictionary size in gzip) here: https://docs.micropython.org/en/latest/reference/packages.html#distribution-packages

4. 2. 2019 v 11:14, Mitchell Currie [email protected]:

I'm about to create a new minor release... I'll give it a check then. Should be using standard OSX zip parameters, but I'll see what the changes are possible.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/mitchins/micropython-wifimanager/issues/1#issuecomment-460193919, or mute the thread https://github.com/notifications/unsubscribe-auth/AAlfWOvxUnjpNf3QtbtqYLQdkKDAM1R_ks5vKAf3gaJpZM4YmgDq.

[mitchins]

I've released 0.3.6 using the recommended bdist_upip thanks to your suggestion. Could you Kindly give it a try from PyPi

[iBobik]

Currently my upip can not install anything and I do not know why. :-)

[mitchins]

That's strange. It could be running out of memory. ESP8266 right? What micro python platform version as you

[iBobik]

I tried it on Unix. And it seems the issue is for all packages, not only wifimanager.

Jan Pobořil https://honza.poboril.cz/

6. 5. 2019 v 3:24, Mitchell Currie [email protected]:

That's strange. It could be running out of memory. ESP8266 right? What micro python platform version as you

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or mute the thread.

[TKrom]

Do this:

import network sta_if = network.WLAN(network.STA_IF) sta_if.active(True) sta_if.connect('xxx', 'xxx') sta_if.ifconfig() import upip upip.index_urls = ["https://test.pypi.org/pypi", "https://micropython.org/pi", "https://pypi.org/pypi"] upip.install('micropython-wifimanager')

Hope this helps.