SonOTA
SonOTA copied to clipboard
mirko
Sonota.exe not progressing after connecting to ITEAD-SSID
- Operating System: Win10 1909 x64
- Python Version: Sonota.exe
- Sonoff model: 4 ch pro R2
- Sonoff firmware version: ?
I start sonota.exe, enter my wifi credentials, connect to the ITEAD-SSID, some additional lines appear (no flashing though) but then Laptop disconnects from ITEAD-SSID and back to my normal wifi. If I try to reconnect to ITEAD-SSID get error connection not possible.
Using the following configuration: Server IP Address: 172.16.77.115 WiFi SSID: WifiXY WiFi Password: ********* Platform: win32 ** Now connect via WiFi to your Sonoff device. ** Please change into the ITEAD WiFi network (ITEAD-100001XXXX). The default password is 12345678. To reset the Sonoff to defaults, press the button for 7 seconds and the light will start flashing rapidly. ** This application should be kept running and will wait until connected to the Sonoff... ...............................Current IPs: ['10.10.7.2'] ~~ Connection attempt
HTTP GET /10.10.7.1/device << { "apikey": "a9a9bb5d-c2cd-4f48-83ac-74bb9a0c04bf", "accept": "post", "deviceid": "10009f1b79" } HTTP POST /10.10.7.1/ap { "password": "*********", "version": 4, "ssid": "WifiXY", "port": 8443, "serverName": "172.16.77.115" } << { "error": 0 } ~~ Provisioning completed Starting stage2... ** The IP address of <serve_host> (172.16.77.115) is not assigned to any interface on this machine. ** Please change WiFi network to WifiXY and make sure 172.16.77.115 is being assigned to your WiFi interface. ** This application should be kept running and will wait until connected to the WiFi... ......Current IPs: ['172.16.77.115'] ~~ Starting web server (HTTP port: 8080, HTTPS port 8443) ~~ Waiting for device to connect
I am having this same issue. I never sends anything to the Sonoff after connecting, and the part that begins with "*** IMPORTANT! ***" just repeats every minute or so. Did you find a solution?
