dm500-satip
dm500-satip copied to clipboard
mildsunrise
📡 Kernel & firmware image to turn a DM500 into a SAT>IP server
Doing some quick testing using a Technisat Multitenne Dish which integrates a DiSEqC 1.0 switch and 4 LNB satellite positions will only give Astra 1 19,2: ``` AA Astra1 19,2...
When not using the DreamUp flash tool, these telnet/ftp instructions will do the job. Also added a note on detecting SAT>IP tuners in Tvheadend using `--bindaddr $TVHEADENDSERVER-IPADDRESS`.
I have a dm500 that has been working without any problem with this satip image, after a few months with the device turned off, now I have turned it on...
I have following setup: 1- Dreambox 500 2- Flashed image dm500-satip-2.0.img 3- Got IP + Signal 4- untick the "Full Mux Rx mode supported" checkbox if it's ticked, in the...
Hello, I am experiencing a problem when accessing the IP satip DVB-S ADAPTER TUNED TO Offline Unset STRENGTH SNR BER STREAMS No open streams. What can it be? I'm using...
Hello, ive got a problem. I want to use your image with the dm500 C but it sayd " Error: No tuner is available. Please file an issue on dm500-satip."...
Dear Xavi. I had an dm500 which has been working without any problem for years. Now after an current problem (in the house) it is rebooted, and now it is...
is there a way to change the lnb type for tvheadend? as i mentioned before, i switched to a dpp lnb and dpp switch to feed my server, weird thing...
Hello I try to get my dreambox 500s sat ip to work with tvheadend 4.0.9 on opnewrt the sat ip doesnt show up in tv adapters Thank you
The issue is when connected to a switch that starts right up it won't request ip from dhcp when it apears (router boots up) you need to restart it manualy....
Metadata
Owner
Metadata
📡 Kernel & firmware image to turn a DM500 into a SAT>IP server