shairport-sync
shairport-sync copied to clipboard
[thank you ❤️]: no issues here, just wanted to say thanks!
What happened?
I don't have a bug to report, I'm just very grateful! I have a pi running rasperry pi os (not hifiberry os) + a hifiberry digi+
sending audio via TOS cable to a standalone hardware dac and airplay is working wonderfully.
Had a wee bit of teething trouble thinking that there was no audio at first. However upon further investigation it was just really, really, really quiet. Thankfully the ignore_volume_control
parameter in /etc/shairport-sync.conf
sorted me right out. (Might be worth a quick note in either the readme or "finish setting up" page in case anyone else stumbles across the same thing with a similar setup?)
Thank you for building such a wonderful thing. I can tell that a great deal of hard work went into this beautiful project. Such detailed yet concise documentation too. Please keep up the outstanding work ❤️
Relevant log output
No response
System Information.
I have a pi running rasperry pi os (not hifiberry os) -> a hifiberry digi+
-> sending audio via TOS cable -> a standalone hardware dac -> standalone amp & speakers
For anyone who stumbles across this issue wondering exactly what I did to set up my system:
- Follow the hifiberry instructions here https://www.hifiberry.com/docs/software/configuring-linux-3-18-x/, also the linux 5.4 and higher bit
- Follow the shairport-sync readme
- Change this config in
/etc/shairport-sync.conf
(leave everything else unchanged)
general =
{
ignore_volume_control = "yes";
};
alsa =
{
output_device = "hw:0";
};
- Enable the shairport-sync service and reboot
Configuration Information.
Nothing to add here
PulseAudio or PipeWire installed?
- [ ] Check if your system uses a Sound Server.
How did you install Shairport Sync?
Built from source
Check previous issues
- [X] Confirm
Many thanks for your kind words. It's really great to know that people -- apart from me! -- are enjoying Shairport Sync!
Let me think about how best to incorporate your suggestions in the documentation.
This issue has been inactive for 28 days so will be closed 7 days from now. To prevent this, please remove the "stale" label or post a comment.
bump! Thanks @mikebrady for substantial new features - I'm very glad I can use Airplay2 devices, and the new nqptp with reduced privileges is a huge improvement!
This issue has been inactive for 28 days so will be closed 7 days from now. To prevent this, please remove the "stale" label or post a comment.