owasp-threat-dragon-desktop
owasp-threat-dragon-desktop copied to clipboard
mike-goodwin
FAQs: Images of the Threat Diagram are cropped in the Report
When I go to run the Report on a model (actually a group of models), the Diagrams are cropped so that the reader can't see the entire model.
I'm getting several red, brief, pop-up style warnings when running the Report. They appear to be identical and state "Error: cannot read property 'cells' of undefined".
I'm using version 1.2, on a MacBook Air running 10.14.6
Hello @craig-Ayla - could you send me either the pdf output or the json file? I can have a look Having said that I understand if you do not want to send your threat models around for everyone to have a look ... a bit of a reveal :-) But if you can repeat it with a generic model that would be great
I see the error "Error: cannot read property 'cells' of undefined" when I have a diagram with no elements in it, do you have any diagrams in your threat model that are empty?
No. The diagrams all have elements (process, actor, store…). There are 6 diagrams.
Some of the diagrams do not have Threats yet.
Craig
On Jul 13, 2020, at 10:09 PM, Jon Gadsden <[email protected]mailto:[email protected]> wrote:
I see the error "Error: cannot read property 'cells' of undefined" when I have a diagram with no elements in it, do you have any disgrams in your threat model that are empty?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/mike-goodwin/owasp-threat-dragon-desktop/issues/146#issuecomment-657969752, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AKDUUEQBCSQCXVA2OV3YIUTR3PSBTANCNFSM4OY4I22Q.
Let me see if I can recast it so it’s more generic… Probably be a day or two (sorry - can’t be helped).
Craig
On Jul 13, 2020, at 10:08 PM, Jon Gadsden <[email protected]mailto:[email protected]> wrote:
Hello @craig-Aylahttps://github.com/craig-Ayla - could you send me either the pdf output or the json file? I can have a look Having said that I understand if you do not want to send your threat models around for everyone to have a look ... a bit of a reveal :-) But if you can repeat it with a generic model that would be great
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/mike-goodwin/owasp-threat-dragon-desktop/issues/146#issuecomment-657969519, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AKDUUEVXCAKZ3B2J6A3G5SDR3PR6LANCNFSM4OY4I22Q.
OK, thanks @craig-Ayla - it may be platform dependent as well, so I can test your json/pdf on all three platform types when you are ready.
Not sure why you are getting the errors "Error: cannot read property 'cells' of undefined". Do you want to raise a bug issue for this at : https://github.com/OWASP/threat-dragon-core/issues
Thanks again, Jon
Hi Jon,
I’m terribly sorry - there were diagrams without any objects in them. I’d forgotten I’d added them.
Also, I didn’t realize that the ends of the Data Flow arrows could be ‘attached’ to the Actor/Store, etc by dragging them into the center of the object. Fixing that had the side-effect of fixing the diagram cropping issue.
What would you like me to do with the Issue on GitHub now?
Craig
On Jul 14, 2020, at 9:32 AM, Jon Gadsden <[email protected]mailto:[email protected]> wrote:
OK, thanks @craig-Aylahttps://github.com/craig-Ayla - it may be platform dependent as well, so I can test your json/pdf on all three platform types when you are ready.
Not sure why you are getting the errors "Error: cannot read property 'cells' of undefined". Do you want to raise a bug issue for this at : https://github.com/OWASP/threat-dragon-core/issues
Thanks again, Jon
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/mike-goodwin/owasp-threat-dragon-desktop/issues/146#issuecomment-658282086, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AKDUUERH2U3E7W2JI4UOCRDR3SCADANCNFSM4OY4I22Q.
No problem at all @craig-Ayla , good to hear that the cropping issue is sorted and that the cause of the errors are known. We need a FAQ on this really, because many users would have been in the same situation. Very good that you raised this issue, otherwise we never hear about these problems.
Do you mind if we keep this as a Documentation issue? We need to update the FAQs for this ... possibly on the project page at https://owasp.org/www-project-threat-dragon/
Feel free to keep everything I’ve sent. And, thanks for providing the tool!
Craig
On Jul 14, 2020, at 12:41 PM, Jon Gadsden <[email protected]mailto:[email protected]> wrote:
No problem at all @craig-Aylahttps://github.com/craig-Ayla , good to hear that the cropping issue is sorted and that the cause of the rrors are known. We need a FAQs really, because many users would have been in the same situation. Very good that you raised this issue, otherwise we never hear about these problems.
Do you mind if we keep this as a Documentation issue? We need to update the FAQs for this ... possibly on the project page at https://owasp.org/www-project-threat-dragon/
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/mike-goodwin/owasp-threat-dragon-desktop/issues/146#issuecomment-658375011, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AKDUUESAL2POMVUZQE6JGFDR3SYE7ANCNFSM4OY4I22Q.
Hey, I do have one question (or possibly request). I’m using the local version. I open the model file, then select a diagram and work on it, and often I want to go to a different diagram. It seems that I have to completely close the model, then reopen it, and then select the next diagram I want to work on. I’m wondering if there’s a way that I can go from diagram to diagram without closing the model file and reopening it. If there’s not, I think that would be a good usability enhancement.
Craig
On Jul 14, 2020, at 4:01 PM, Craig Payne <[email protected]mailto:[email protected]> wrote:
Feel free to keep everything I’ve sent. And, thanks for providing the tool!
Craig
On Jul 14, 2020, at 12:41 PM, Jon Gadsden <[email protected]mailto:[email protected]> wrote:
No problem at all @craig-Aylahttps://github.com/craig-Ayla , good to hear that the cropping issue is sorted and that the cause of the rrors are known. We need a FAQs really, because many users would have been in the same situation. Very good that you raised this issue, otherwise we never hear about these problems.
Do you mind if we keep this as a Documentation issue? We need to update the FAQs for this ... possibly on the project page at https://owasp.org/www-project-threat-dragon/
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/mike-goodwin/owasp-threat-dragon-desktop/issues/146#issuecomment-658375011, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AKDUUESAL2POMVUZQE6JGFDR3SYE7ANCNFSM4OY4I22Q.
Hello @craig-Ayla - there is a quicker way to swap between diagrams. Exit from the first diagram using the 'X' button (between the grid and the bin buttons) in the drawing pane. This takes you back to the project view, and then click on the next diagram thumbnail.
Again this is good feedback, and I will put it into the FAQs.
Cheers, Jon
Ah ha! That works like a charm, though it’s not what I would have expected for a button that says ‘cancel’ when I hover over it. Maybe ‘cancel pending edits and close diagram’?
Craig
On Jul 15, 2020, at 12:28 PM, Jon Gadsden <[email protected]mailto:[email protected]> wrote:
Hello @craig-Aylahttps://github.com/craig-Ayla - there is a quicker way to swap between diagrams. Exit from the first diagram using the 'X' button (between the grid and the bin buttons) in the drawing pane. This takes you back to the project view, and then click on the next diagram thumbnail.
Again this is good feedback, and I will put it into the FAQs.
Cheers, Jon
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/mike-goodwin/owasp-threat-dragon-desktop/issues/146#issuecomment-658961583, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AKDUUER5JPMZXLLMZ53L62LR3X7NVANCNFSM4OY4I22Q.
That is a very good point - it is misleading. I have changed it to 'Close Diagram' in commit:
https://github.com/OWASP/threat-dragon-core/commit/51263f85d98b26dee7f445ccc23ca64934fa1a74
which should appear in version 1.3 due in August
Thank you!
Craig
On Jul 16, 2020, at 1:54 AM, Jon Gadsden <[email protected]mailto:[email protected]> wrote:
That is a very good point - it is misleading. I have changed it to 'Close Diagram' in commit:
OWASP/threat-dragon-core@51263f8https://github.com/OWASP/threat-dragon-core/commit/51263f85d98b26dee7f445ccc23ca64934fa1a74
which should appear in version 1.3 due in August
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/mike-goodwin/owasp-threat-dragon-desktop/issues/146#issuecomment-659261794, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AKDUUEQTVVLAFGXUOXXILRTR3253RANCNFSM4OY4I22Q.