Please, add support to "XVV Smart Wifi PTZ Camera (XVV-6620S-Q8)"

[wbrione]

python3 miottemplate.py print urn:miot-spec-v2:device📷0000A01C:xiaovv-xvsnowman:1.json Device 'urn:miot-spec-v2:device📷0000A01C:xiaovv-xvsnowman:1': Camera with 3 services

Service siid 1: (Device Information): 4 props, 0 actions

  ## Properties ##
          siid 1: piid: 1 (Device Manufacturer): (string, unit: None) (acc: ['read'])
          siid 1: piid: 2 (Device Model): (string, unit: None) (acc: ['read'])
          siid 1: piid: 3 (Serial Number): (string, unit: None) (acc: ['read'])
          siid 1: piid: 4 (Current Firmware Version): (string, unit: None) (acc: ['read'])

Service siid 2: (Camera Control): 1 props, 0 actions

  ## Properties ##
          siid 2: piid: 1 (Switch Status): (bool, unit: None) (acc: ['read', 'write'])

Service siid 3: (P2P Stream): 0 props, 2 actions

  ## Actions ##
          siid 3: aiid 1 Start P2P Stream: in: [] -> out: []
          siid 3: aiid 2 Stop Camera Stream: in: [] -> out: []

[wbrione]

videop2proxy --ip 192.168.1.135 --token ******** --rtsp 8554 Starting proxy... Starting RTSP server on "rtsp://172.17.0.3:8554/" (Using port 80 for optional RTSP-over-HTTP tunneling.)

Traceback (most recent call last): File "", line 1, in File "/usr/local/lib/python3.7/dist-packages/miio/device.py", line 179, in send command, parameters, retry_count, extra_parameters=extra_parameters File "/usr/local/lib/python3.7/dist-packages/miio/miioprotocol.py", line 214, in send self._handle_error(payload["error"]) File "/usr/local/lib/python3.7/dist-packages/miio/miioprotocol.py", line 274, in _handle_error raise DeviceError(error) miio.exceptions.DeviceError: {'code': -10000, 'message': 'user undefined error'} Can't read output line 1 from command: python3 -c "import miio;result = miio.device.Device('192.168.1.135', '***********').send('get_ipcprop', ['all']);print(result['p2p_id']);print(result['avID']);print(result['avPass']);" Error connecting to camera, make sure ip and token are correct. Error, waiting 10 seconds and trying again.

But...

ping 192.168.1.135 PING 192.168.1.135 (192.168.1.135) 56(84) bytes of data. 64 bytes from 192.168.1.135: icmp_seq=1 ttl=63 time=6.37 ms 64 bytes from 192.168.1.135: icmp_seq=2 ttl=63 time=276 ms

Obviously the token is also correct, as it was used to extract the device metadata from the xiaomi platform

[febriyan1302]

same issue on me {'code': -10000, 'message': 'user undefined error'}

[Snakesms]

Did you check that the last commit to this repository had been made 3 years ago on 29 Sep 2018? This project is not in development for a long time already. so nothing to hope about I'm afraid

[febriyan1302]

a little bit debugging, this project using python-miio, so yeah miio can't support my camera (Xiaomi mi camera ptz 2k pro)

[febriyan1302]

wait, i corrected, it's support with miio 👍 mybe basic function..