mid-kid

I have a few requests for you guys to try out to narrow down the possible cause of the problem: 1. Try loading the rxTools nightlies the same way (rxTools.3dsx)...

That's the problem with this bug: It only happens to select people and I've yet to find someone with enough patience to sit with me a few hours and debug...

There's not many issues anyway, so this issue is fine here (Can't move all the messages). Thanks for explaining the problem, that helps a lot. It's probably a problem introduced...

Never load them at offset zero, that's where the spider payload is located. The arm9 payload is located at 0x12000, which is what you want. Also, I see no reason...

If you've recently applied a kernel update, make sure you reboot and reinstall the driver. Also look through your `dmesg` for any relevant messages or errors that might help. Ultimately,...

DDing the iso straight to a USB drive works for me, even with UEFI. I've used the iso like that sometimes, and it automatically expands the data partition to allow...

Apparently, you're right. According to [the release notes](http://www.knopper.net/knoppix/knoppix910-en.html): ``` KNOPPIX 9.1 generally supports booting in → UEFI and → Secure Boot after installation on USB flash disk. But in order...

Booting it in a UEFI VM isn't the issue, you just have to pretend it's a USB or hard disk image: ``` qemu-system-x86_64 -m 2G -enable-kvm -hda KNOPPIX_V9.1DVD-2021-01-25-EN.iso -bios /usr/share/edk2-ovmf/OVMF_CODE.fd...

You mean that if we rename it to .img it would work? I'll try that later.

Sorry for bumping this thread, but I've followed the instructions in https://github.com/nmikhailov/Validity90/issues/34#issuecomment-376230153, and here's the results: https://transfer.sh/LnWdg/WUDFHost.dmp https://transfer.sh/J9y9M/fprint.pcapng Hopefully this helps a bit. Guest info: Windows 10 Home x64, VirtualBox...