I2C issue using 2.0.0

Open fmuntean opened this issue 4 years ago • 2 comments

After uploading the firmware to the board and reset it the i2C stops workign.

I have the feeling the bootloader could be wrong here as the board works fine if I upload the sample firmware.

See logs:

** MXChip - Microsoft IoT Developer Kit **

[380][OLED: .\az3166-driver\libraries\drivers\display\VGM128064\oled.c: 307] OLED_ERROR: no i2c device found! You can 1. press Button A and reset to enter configuration mode. 2. press Button B and reset to enter AP mode.

Feb 07 '21 20:02 fmuntean

from further testing seems to happen when the serial monitor is open while booting.

Feb 07 '21 23:02 fmuntean

This issue has no recent activities, please take a look and provide updates for it.

Feb 11 '21 00:02 github-actions[bot]