Michael P.

installation problem

2

Hi, after installation (2022-02) cannot select the card. If I will add it manual - get an error: card undefined Error: No card type configured Uncaught (in promise) http://192.168.x.y:8123/hacsfiles/lovelace-miflora-card/miflora-card.js Any...

CubeCell micros() issue in Arduino code

2

We are expecting different problems with the CubeCell using the micros() function. To reproduce: ``` #include uint32_t last = 0; void setup() { Serial.begin(115200); delay(2000); while(!Serial); } void loop() {...

Xiaomi Flower Care - no data

2

Hi, thank you for your module. The Temp./Hum Sensor is working fine, but flower care give me only "no data". Have of course double checked the address - it is...

add SensorMultilevel

2

Using HTTPDevice or CodeDevice it can be used to get values from MQTT server

app still active supported?

2

@Edubits Hi, do you support still this app? I would like to extend the app for multilevel sensors (HTTP device,..) . Will you still merge PR in futue ? (if...

Z-Way was closed - last entries I found in the log: ``` [2020-05-01 18:51:23.548] [E] [core] Callback execution error: RangeError: Maximum call stack size exceeded at new Buffer (automation/userModules/MQTT/lib/buffer.js:33:15) at...

I have installed the app and it was working , but not very stable (missing values). Have used 4 temperature sensors (battery devices) in one configuration. So I have added...

Error about correct license - but license provided...

2

I have to "reactivate" a WSLV3 board (have erased flash while looking for an other issue) - but the serial activation does not work. Using the LoRaWan.ino sample code and...

Wire.begin() should not be used within a library

3

A redefinition of pins is not possible, using two I2C interfaces in ESP32 also not. Possible multiple Wire.begin() should not be in a sketch, right? Same issue was solved here...

[New device support]: TRV602 with OLED

2

### Link https://de.aliexpress.com/item/1005006532990566.html ### Database entry {"id":9,"type":"EndDevice","ieeeAddr":"0x90ab96fffe721a13","nwkAddr":63442,"manufId":4742,"manufName":"eWeLink","powerSource":"Battery","modelId":"CK-MG22-TRVZB-01(7017)","epList":[1],"endpoints":{"1":{"pr ofId":260,"epId":1,"devId":769,"inClusterList":[0,1,3,6,32,513,64599,64529],"outClusterList":[10,25],"clusters":{"64529":{"attributes":{"24578":700}},"genBasic":{"attributes":{"appVersion":0}},"hvacThermos tat":{"attributes":{"systemMode":0,"localTemp":2250,"occupiedHeatingSetpoint":700,"runningState":0}},"genPollCtrl":{"attributes":{"checkinInterval":14400}},"genOnOff":{"attributes":{"onOff":0}},"genPowerCf g":{"attributes":{"batteryPercentageRemaining":0}}},"binds":[{"cluster":32,"type":"endpoint","deviceIeeeAddress":"0x943469fffe0d65a9","endpointID":1},{"cluster":1,"type":"endpoint","deviceIeeeAddress":"0x9 43469fffe0d65a9","endpointID":1},{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x943469fffe0d65a9","endpointID":1}],"configuredReportings":[{"cluster":1,"attrId":33,"minRepIntval":3600,"maxRepIntval" :65000,"repChange":10,"manufacturerCode":null},{"cluster":6,"attrId":0,"minRepIntval":0,"maxRepIntval":65000,"repChange":1,"manufacturerCode":null}],"meta":{}}},"appVersion":0,"dateCode":"20230811","swBuil dId":"1.1.1","zclVersion":8,"interviewCompleted":true,"meta":{"configured":1324213189},"lastSeen":1715696543167,"checkinInterval":3600} ### Comments Have tried to add the device, but it is "unsupported". Can only add the store...