Update to 3.2.1 not working after reboot

[radi7777]

I spent my amiga a Update to 3.2.1 this will reboot 2 times an then hang with black screen

its a pure 3.2 system on the latest nightly 0228

[skabmedia]

Working fine here, I suppose there was a problem with the update itself. If you have a backup, revert to that and try again.

Slight tangent: In case you are wondering how to make a backup, easiest way would be to remove the SD card and make a dump of the whole card, that way you can easily restore even from a card failure. Just keep in mind that a, say, 32GB card could be of slightly different size as another (different brand) 32GB card, so the partitioning could be off when you simply restore the image.

[craziazkowboi]

For backups, I use ‘dd’ on  Mac/Linux, or Rufus on windows.  And a 32Gb image will always restore to a 32Gb card, unless your SD/CF card is a fake.I did a blog on sd and cf card standards and backups on a Mac if anyone is interested:https://amiga1000parceiro.blogspot.com/2022/12/amiga-1000-parceiro-hard-drive.htmlSent from my iPadOn 10 Jun 2023, at 11:04 pm, Steffen Barabasch @.***> wrote: Working fine here, I suppose there was a problem with the update itself. If you have a backup, revert to that and try again. Slight tangent: In case you are wondering how to make a backup, easiest way would be to remove the SD card and make a dump of the whole card, that way you can easily restore even from a card failure. Just keep in mind that a, say, 32GB card could be of slightly different size as another (different brand) 32GB card, so the partitioning could be off when you simply restore the image.

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: @.***>