High Mult at lowest value causes a reverb snowball into a wall of noise (Hall Reverb)

[Arkforest]

I just encountered this issue:

If I set the High Mult knob to its lowest setting with Dragonfly Hall Reverb, after 5 or 10 seconds, a wall of noise just comes at my sound system. The easiest way to reproduce this glitch is with the following configuration:

Size: 60m Decay: 0.1ms (this is to see the glitch visually on the decaymeter) High Mult: 0.2x High Cross: 16000Hz (This one is important for actually getting the wall of sound)

I've also discovered that if there is a cancellation of sound, upon initialising the plugin, the cancellation of sound gives way to the wall of noise.

The attached video demonstrates this glitch pretty well.

https://github.com/michaelwillis/dragonfly-reverb/assets/125376397/54b31a99-8b5d-46e1-98a3-fa1ea4cd79b3

[michaelwillis]

@Arkforest Thanks for reporting this, I was able to reproduce it on my computer. I'll see what I can do about a fix, but for now just avoid those settings.

[Arkforest]

@Arkforest Thanks for reporting this, I was able to reproduce it on my computer. I'll see what I can do about a fix, but for now just avoid those settings.

That was quick! Thank you for the advisory.