Michael

@pkendall64 No problem to to that. The IR diode already has it's config item for the pin to use and it'll work on PWM pins just fine (I used a...

Yes, it will be compatible with DShot. RMT has multiple channels. We are working on a common RMT resource handler.

Robitronic/Easylap IR transponder protocol was successfully tested using a ZRound lap timing system. The system registered the expected transponder ID 902156 and successfully identified the transponder passing the timing bridge....

I took the RXN1 to the track today. MT12 with Jumper AION Nano TX module, F1000, 100mW dynamic, 1:64 tlm ratio. TPWR sat solid at 10mW, 1RSS looking great and...

I put in an issue at Espressif Systems https://github.com/espressif/arduino-esp32/issues/9896. They confirmed the problem and will fix it. Why Serial0 and Serial1 behave differently is under investigation.

I first started thinking this might be an expert option but of course I see your point. To do a proper user UI I need some discussion on how to...

Example: SuperP 14CH configured to have SBUS on the primary serial and HoTT telemetry on the primary serial defined to be on channel 11 and 12 (JST connector):  ...

Thanks for your review. I think "Serial2 RX" and "Serial2 TX" would be fine. The Serial2 prefix can be used for WebUI protocol selection too. I'd name it "Serial2 Protocol"...

names updated

This is what it looks like currently. Let me know if you have other ideas.