Michael
Michael
Ok, because the mixer task is not yet running?
@ParkerEde shot a video of his IRange IRX+ MPM showing a flashing red LED at 0 .5s on/off interval. https://www.multi-module.org/using-the-module/troubleshooting lists this as "slow blink":  Of course it might...
would be worth mentioning the rather unexpected behavior for selecting channels as throttle source: https://edgetx.gitbook.io/edgetx-user-manual/edgetx-user-manual/user-manual-for-color-screen-radios/model-settings/model-setup/throttle Something like this: `Source: The source that will be used for the throttle. In case...
@pfeerick @philmoz Can we at least try to make this a little better, by checking the real throttle input? I believe by extending the source selection options to physical inputs,...
@raphaelcoeffic have a close look at the la trace. decode it with the mpm sport uart settings 100000,8,e,1 and you'll find bit errors indicated by parity and framing errors. the...
@raphaelcoeffic @3djc hypothesis about the error this issues describes, the loss of serial communication to the MPM: As the trace shows there are a lot of UART parity and frame...
@raphaelcoeffic > Yeah, maybe some pull-up / pull-down settings, that could be. But not sure why the thing would then fully break after a while... read my hypothesis? If a...
talking about probability, check out the vast number of UART warnings. They are all parity and framing errors most likely due to the insufficient high level. 