Mikhail Grushinskiy

Also https://www.cruisersforum.com/forums/f134/recommended-cockpit-platform-285146-10.html#post3896976

Per Edatec support after the following changes lightdm starts: removed /etc/udev/rules.d/99-uinput.rules and modified /usr/share/X11/xorg.conf.d/90-touchinput.conf ```` user@lysmarine:~ $ cat /usr/share/X11/xorg.conf.d/90-touchinput.conf Section "InputClass" Identifier "calibration" Driver "evdev" MatchProduct "4-0014 Goodix Capacitive TouchScreen...

Regarding Waveshare DSI touchscreen issues here is a thread on raspberry pi forums: https://forums.raspberrypi.com/viewtopic.php?t=366011

Rotating DSI display discussion https://forums.raspberrypi.com/viewtopic.php?t=369626 best way to tell X that the desktop should be rotated is via `xrandr --output DSI-1 --rotate left` or similar

Regarding screen rotation on Edatec Look for CalibrationMatrix https://www.cruisersforum.com/forums/f134/cant-install-opencpn-on-rpi5-286085.html#post3899802

 Edatec support was able to solve all issues with their touchscreen on BBN OS: Hi Mikhail, I've solved the problem of twofing not working. It needs to modify “/usr/share/X11/xorg.conf.d/90-touchinput.conf”...

I see same issue here. If I close radar screen using top right [x] I can’t bring it back

They need to have single place for original downloaded charts which we have I think. OpenCpn one. All signalK based ones will use it as primary source to generate mbtiles...

freenboard-sk supports only raster charts. All other chatplotters except of OpenCPN are mbtiles based and currently support only raster mbtiles. OpenCPN is not tiling plotter but it supports lots of...

I do like approach based on vendor/product ID. It lets you to re-plug device into different USB port and still be named same