mf76130

Did you test your config with --checkconfig? example: run in the terminal: ebusd --configpath=/etc/ebusd/ -d /dev/ttyUSB0 --latency=0 --loglevel=info --poll=9 --scanconfig=full --httpport=8889 --htmlpath=/var/ebusd/html --checkconfig this then shows you if there are...

I have a similar behaviour- Yesterday i moved my esera adapter and my vr900 into my switchboard and used a cat 6 cable for the bus. On the first start,...

I just started testing without --scanconfig I just have the files i need local stored and now i get more data. Just waiting if i also get the energy values...

Scanconfig found the devices over time anyhow, but didn't load files, but with the info about the devices i could see which files i needed (08.hmu.csv and 15.700.csv), the rest...

i blanked out the energy paramters in the csv's and grabbed the new result ebusctl grab result 1008b507010a / 037e8207 = 2 1008b5110100 / 09c502ff000000008000 = 76 1076b5040100 / 0a0310250715090422600f...

short story, no, didn't get much further. long story: what i read from John and what i observed my self as well is, that if nothing is polling data you...

VR900 which is registered at vaillant https://www.wolf-online-shop.de/Vaillant-Internetkommunikationsmodul-VR-900-E-BUS::57479.html

Same for me, i installed it, all seems to be working, no errors, but the entities are not appearing only the "update" entity

haha, after the 3rd restart of HA it worked

Hi, I want to hijack this discussion :-) Since yesterday i have my new ebusd adapter and now i can write. What i want to achieve is set the hotwater...