firmware

firmware copied to clipboard

[Bug]: Enabling Wi-Fi makes T-LoRas unstable since firmware 2.4

7

### Category WiFi ### Hardware T-Lora v2 1.6 ### Firmware Version 2.4.x ### Description Ever since I've upgraded my T-LoRas to 2.4.x I'm experiencing issues in keeping the nodes up...

IZ1IVA

[Bug]: Meshtasticd not populating node list

6

### Category Other ### Hardware Linux Native ### Firmware Version 2.5.5 ### Description Trying to direct message between two devices, fresh factory reset and nodes deleted from app on both...

joshbowyer

Add CO2 sensing with SCD4X

13

This PR adds support for CO2 sensing with the SCD40/SCD41 sensors. These sensors also support temperature and relative humidity. Currently, it is using `startLowPowerPeriodicMeasurement`, which has an update interval of...

Coloradohusky

Optimise GPS Baud Rate cycle

1

Previously, our baud rate cycled through one list twice. There were some rarer baudrates in there, so this code separates out those into a dedicated list that is only run...

fifieldt

thebentern

[Bug]: Not Getting Too Large Error from messages that are too large

1

### Category Other ### Hardware T-Lora v2 1.6 ### Firmware Version 2.5.5 ### Description When sending messages larger than 255 bytes I never get back the expected routing error and...

garthvh

Heltec Wireless Tracker (v1.1) GPS module resets periodically on USB-only power

10

Here are a number of issues I observed when powering the Wireless Tracker with USB-C and _no battery_. - After "**turning off screen**" is logged, `VEXT` drops to 1.48V instead...

allanmac

[Bug]: Import configuration fails at 74-78%

4

### Contact Details skelzer ### What happened? I flashed new Heltec v3 to 2.5.6 beta with "Full Erase and Install" - Node A. Then scanned QR code from web client...

mtsdawson

Use SD card as store&forward memory

6

Not 100% sure if this is a good idea.

caveman99

[Bug]: Crashes with PineDIO LoRa USB

1

### Category Hardware Compatibility, Other ### Hardware Linux Native ### Firmware Version d73cbf14d5b0cf8a3f94d8028b9ab60d297fed96 (master) and older ### Description When I use Meshtastic on Linux Native with the PineDIO LoRa USB,...

Pigpog