T5-4.7-S3 Epaper Pro support

[mverch67]

resolves #6607

Status

V1: hw version v1.0-240810 V2: hw version v1.0-241224

• [x] V1: SX1262 LoRa
• [x] V2: SX1262 LoRa
• [x] E-Ink display ED047TC1
• [x] V2: EInk power driver TPS65185 (0x68)
• [x] GT911 touch controller (0x5D)
• [x] PMU BQ25896 (0x6B)
• [x] Battery Mgmt BQ27220 (0x55)
• [ ] RTC PCF85063A (0x51) see #8061
• [x] V2: GNNS MIA-M10Q
• [x] SD card
• [x] V2: IO expander XL9555 (0x20)

🤝 Attestations

• [ ] I have tested that my proposed changes behave as described.
• [ ] I have tested that my proposed changes do not cause any obvious regressions on the following devices:
  • [ ] Heltec (Lora32) V3
  • [ ] LilyGo T-Deck
  • [ ] LilyGo T-Beam
  • [ ] RAK WisBlock 4631
  • [ ] Seeed Studio T-1000E tracker card
  • [ ] Other (please specify below)

[todd-herbert]

~~I'd be excited if anyone wants to take up the challenge of supporting this device, but I don't feel that InkHUD is particularly suitable. The device really deserves a more interactive UI, but that'd be no small task to implement, whatever the approach.~~

Edit: I had confused this variant with the T-Deck Pro. The non-touch version of the T5-4.7-S3 E-Paper probably is a reasonable target for InkHUD.

[caveman99]

@todd-herbert T-Deck pro adds a keyboard to a similar device. Epaper Pro does have a touchscreen too. I have the V1.2 with GPS here, while @mverch67 does have the first iteration. Since there's more differences it's a challenge to make both of them work :-)

[Xaositek]

I have one of these units if you need me to test anything. I downloaded the files manually and was able to build it via Visual Studio. Seems like the radio portion itself it operational, but the screen never does draw; not a boot logo or anything. Attached bootup log if anything is useful or I failed to do something.

t5s3_boot.txt

[mverch67]

I have one of these units if you need me to test anything.

it's still draft. display support is missing. radio also does not work yet.

[mr-tbot]

Bumping this - grabbed one - hoping for future support!

[mr-tbot]

Please note: Apparently the meshcore team support this device - but there now appears to be a version with GPS and a version without.

They individually require different approaches to get running from what I understand.

I have the newer model with GPS - brand new - happy to send to the dev team as long as I eventually get it back... =)