firmware icon indicating copy to clipboard operation
firmware copied to clipboard
verified publisher icon meshtastic

[Bug]:SEEDSTUDIO says No Interface

Open Sabering1 opened this issue 11 months ago • 12 comments

Category

Hardware Compatibility

Hardware

Other

Firmware Version

2.5.18.89ebafc Beta

Description

I installed latest firmware on seedstudio XIAO ESP32S3 & Wio-SX1262 Kit for Meshtastic & LoRa However i get a error when i want to send a message saying: "No interface" on the android app, also it wont load setting normaly and takes like 2 minutes to load and save them

Relevant log output

Sabering1 avatar Jan 31 '25 23:01 Sabering1

Hi,

I had the same problem but everything changed when I connected pins according to:

https://adrelien.com/blog/meshtastic-diy-how-to-build-your-own-meshtatic-node-esp32-lora-radio/

Try to connect them with the same way.

DrMecq avatar Feb 07 '25 08:02 DrMecq

https://www.seeedstudio.com/Wio-SX1262-with-XIAO-ESP32S3-p-5982.html?qid=eyJjX3NlYXJjaF9xdWVyeSI6Im1lc2h0YXN0aWMiLCJjX3NlYXJjaF9yZXN1bHRfcG9zIjoyLCJjX3RvdGFsX3Jlc3VsdHMiOjEwLCJjX3NlYXJjaF9yZXN1bHRfdHlwZSI6IlByb2R1Y3QiLCJjX3NlYXJjaF9maWx0ZXJzIjoic3RvcmVDb2RlOltyZXRhaWxlcl0ifQ%3D%3D

Im talking about this, there are no pins to connect, its a all in one solution

Sabering1 avatar Feb 07 '25 10:02 Sabering1

Working fine here, have you tried a factory restore?

caveman99 avatar Feb 07 '25 11:02 caveman99

Yes, but i still get the same error

Sabering1 avatar Feb 07 '25 11:02 Sabering1

We need the serial debug log then.

caveman99 avatar Feb 07 '25 11:02 caveman99

how do i provide that any guides?

Sabering1 avatar Feb 07 '25 11:02 Sabering1

@Sabering1 go to https://flasher.meshtastic.org and tap on open serial monitor.

fifieldt avatar Feb 07 '25 12:02 fifieldt

meshtastic-log-2025-02-13T22-47-19.235Z.log

Sabering1 avatar Feb 13 '25 22:02 Sabering1

Please double-check that you flashed the firmware for the correct device.

GUVWAF avatar Feb 15 '25 12:02 GUVWAF

meshtastic-log-2025-02-13T22-47-19.235Z.log

Thanks for the logs. Could you capture them just after a reboot, too?

fifieldt avatar Feb 16 '25 00:02 fifieldt

meshtastic-log-2025-02-13T22-47-19.235Z.log

Thanks for the logs. Could you capture them just after a reboot, too?

No problem but im pretty sure that its the connectors fault as it appers to be damaged a bit, where the connector makes conntact with the pins, ill resolder it and try again, possible that thats why it does not work

Sabering1 avatar Feb 16 '25 01:02 Sabering1

Thanks for the update!

fifieldt avatar Feb 16 '25 01:02 fifieldt

It was the connector, closing

Sabering1 avatar Feb 22 '25 19:02 Sabering1