[Bug]: SHTC3 sensor stays asleep after soft reboot

[liquidraver]

trafficstars

Category

Hardware Compatibility, Other

Hardware

Station G2

Firmware Version

2.5.x

Description

SHTC3 sensor (https://www.adafruit.com/product/4636) stops working after a soft-reboot. Power-cycle solves it.

I'm not good at coding, but I found these, hope it helps somebody more capable:

https://github.com/adafruit/Adafruit_CircuitPython_SHTC3/issues/2 https://github.com/adafruit/circuitpython/issues/4147 https://github.com/adafruit/tinyuf2/issues/74

Relevant log output

After a power-cycle:

.[37m.[0m..[32m.INFO  .[0m| 08:56:10 15 [EnvironmentTelemetry] .[32m.Environment Telemetry: init.[0m
.[37m.[0m..[32m.INFO  .[0m| 08:56:10 15 [EnvironmentTelemetry] .[32m.Init sensor: SHTC3.[0m
.[37m.[0m..[32m.INFO  .[0m| 08:56:10 15 [EnvironmentTelemetry] .[32m.Opened SHTC3 sensor on i2c bus.[0m
.[37m.[0m..[32m.INFO  .[0m| 08:56:11 16 [EnvironmentTelemetry] .[32m.Send: barometric_pressure=0.000000, current=0.000000, gas_resistance=0.000000, relative_humidity=67.099998, temperature=8.650000.[0m


After soft-reboot:

.[37m.[0m..[32m.INFO  .[0m| 08:57:14 15 [EnvironmentTelemetry] .[32m.Environment Telemetry: init.[0m
.[37m.[0m..[32m.INFO  .[0m| 08:57:14 15 [EnvironmentTelemetry] .[32m.Init sensor: SHTC3.[0m
.[33m.[0m..[33m.WARN  .[0m| 08:57:14 15 [EnvironmentTelemetry] .[33m.Can't connect to detected SHTC3 sensor. Remove from nodeTelemetrySensorsMap.[0m