[Bug]: LongFast secondary channel not sending messages with AQ== as PSK

[Th3H0ff]

trafficstars

Category

Other

Hardware

T-Lora v2 1.6, Heltec V3

Firmware Version

2.4.2.5b45303 and 2.5.4.8d288d5

Description

I just went to 2.5.4.8d288d5 Beta and then back to 2.4.2.5b45303 on my Lilygo 1.6 and Heltec-V3. During both migrations I did a flash erase using the Meshtastic web flasher. Now I cannot send messages on my secondary LongFast which I have set up according to https://meshtastic.org/docs/configuration/tips/#creating-a-private-primary-with-default-secondary. I have a primary admin channel with a PSK which works for both remote administration and messaging.

Both units have the same frequency slot, 1 for EU_868. Same PSK for LongFast, AQ==

If I create a third channel with random name and PSK, messaging works on that one. If I change the PSK to either none or a random one for LongFast, messaging works. If I change PSK back to AQ== it doesn’t work. If I use LongFast as primary channel with PSK AQ== it works. Even if no message is delivered, either in the app or shown on the device screen, the app show the cloud with the tick mark for each message.

What bothers me is that I’m pretty sure it worked before I went reflashing the devices

Relevant log output

No response