firmware
firmware copied to clipboard
Published
20 hours ago •
meshtastic
meshtastic
[Bug]: GPIO output gpio_num error
Category
Hardware Compatibility
Hardware
Heltec v2.1
Firmware Version
2.3.9.f06c56a
Description
Device: Heltec V2.1 Firmware: 2.3.9.f06c56a Alpha
Error: E (29334) gpio: gpio_set_level(226): GPIO output gpio_num error Expected: no error message regarding GPIO's after shutdown
During shutdown there is an error message regarding invalid IO numbers. It is unclear whether this could have negative effects after the resume. This error message does not appear on other devices.
Relevant log output
ets Jun 8 2016 00:22:57
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:1184
load:0x40078000,len:13192
load:0x40080400,len:3028
entry 0x400805e4
E (822) esp_core_dump_flash: No core dump▒▒ѥѥ▒▒▒found!
E (822) esp_core_dump_flash: No core dump partition found!
[ 12][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 480 / 2 = 240 Mhz, A PB: 80000000 Hz
▒▒@INFO | ??:??:?? 0
//\ E S H T /\ S T / C
INFO | ??:??:?? 0 Booted, wake cause 0 (boot count 1), reset_reason=reset
DEBUG | ??:??:?? 0 Filesystem files (491520/1048576 Bytes):
DEBUG | ??:??:?? 0 /prefs/channels.proto (57 Bytes)
DEBUG | ??:??:?? 0 /prefs/config.proto (103 Bytes)
DEBUG | ??:??:?? 0 /prefs/db.proto (396 Bytes)
DEBUG | ??:??:?? 0 /prefs/module.proto (106 Bytes)
DEBUG | ??:??:?? 0 /static/.gitkeep (0 Bytes)
DEBUG | ??:??:?? 0 /static/Logo_Black.svg.gz (602 Bytes)
DEBUG | ??:??:?? 0 /static/Logo_White.svg.gz (610 Bytes)
DEBUG | ??:??:?? 0 /static/apple-touch-icon.png.gz (3164 Bytes)
DEBUG | ??:??:?? 0 /static/favicon.ico.gz (2270 Bytes)
DEBUG | ??:??:?? 0 /static/icon.svg.gz (852 Bytes)
DEBUG | ??:??:?? 0 /static/index-BMhLjTmL.css.gz (16270 Bytes)
DEBUG | ??:??:?? 0 /static/index-Bt2MYVVB.js.gz (203021 Bytes)
DEBUG | ??:??:?? 0 /static/index-CGqDWSD_.js.gz (348 Bytes)
DEBUG | ??:??:?? 0 /static/index.html.gz (548 Bytes)
DEBUG | ??:??:?? 0 /static/maplibre-gl-BXZZhNda.js.gz (210451 Bytes)
DEBUG | ??:??:?? 0 /static/robots.txt.gz (42 Bytes)
DEBUG | ??:??:?? 0 /static/site.webmanifest.gz (197 Bytes)
[ 554][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=4 scl=15 freq=100000
DEBUG | ??:??:?? 0 Using analog input 37 for battery level
INFO | ??:??:?? 0 ADCmod: ADC characterization based on reference voltage store d in eFuse
INFO | ??:??:?? 0 Scanning for i2c devices...
[ 581][W][Wire.cpp:301] begin(): Bus already started in Master Mode.
DEBUG | ??:??:?? 0 Scanning for i2c devices on port 1
DEBUG | ??:??:?? 0 I2C device found at address 0x3c
DEBUG | ??:??:?? 0 0xf subtype probed in 2 tries
INFO | ??:??:?? 0 1 I2C devices found
DEBUG | ??:??:?? 0 acc_info = 0
INFO | ??:??:?? 0 Meshtastic hwvendor=10, swver=2.3.9.f06c56a
DEBUG | ??:??:?? 0 Setting random seed 2729838439
DEBUG | ??:??:?? 0 Total heap: 197596
DEBUG | ??:??:?? 0 Free heap: 163068
DEBUG | ??:??:?? 0 Total PSRAM: 0
DEBUG | ??:??:?? 0 Free PSRAM: 0
DEBUG | ??:??:?? 0 NVS: UsedEntries 90, FreeEntries 540, AllEntries 630, NameSpa ces 3
DEBUG | ??:??:?? 0 Setup Preferences in Flash Storage
DEBUG | ??:??:?? 0 Number of Device Reboots: 8
DEBUG | ??:??:?? 0 OTA firmware version 0.2.1.ceca52c
INFO | ??:??:?? 0 Initializing NodeDB
INFO | ??:??:?? 0 Loading /prefs/db.proto
INFO | ??:??:?? 0 Loaded /prefs/db.proto successfully
INFO | ??:??:?? 0 Loaded saved devicestate version 22, with nodecount: 2
INFO | ??:??:?? 0 Loading /prefs/config.proto
INFO | ??:??:?? 0 Loaded /prefs/config.proto successfully
INFO | ??:??:?? 0 Loaded saved config version 22
INFO | ??:??:?? 0 Loading /prefs/module.proto
INFO | ??:??:?? 0 Loaded /prefs/module.proto successfully
INFO | ??:??:?? 0 Loaded saved moduleConfig version 22
INFO | ??:??:?? 0 Loading /prefs/channels.proto
INFO | ??:??:?? 1 Loaded /prefs/channels.proto successfully
INFO | ??:??:?? 1 Loaded saved channelFile version 22
[ 1008][E][vfs_api.cpp:105] open(): /littlefs/oem/oem.proto does not exist, no permits for creation
INFO | ??:??:?? 1 File /oem/oem.proto not found
DEBUG | ??:??:?? 1 cleanupMeshDB purged 0 entries
DEBUG | ??:??:?? 1 Using nodenum 0xc999a000
DEBUG | ??:??:?? 1 Number of Device Reboots: 8
DEBUG | ??:??:?? 1 Expanding short PSK #1
INFO | ??:??:?? 1 Wanted region 3, using EU_868
INFO | ??:??:?? 1 Saving /prefs/db.proto
DEBUG | ??:??:?? 1 Using GPIO00 for button
DEBUG | ??:??:?? 1 SPI.begin(SCK=5, MISO=19, MOSI=27, NSS=18)
DEBUG | ??:??:?? 1 Set Timezone to GMT0
DEBUG | ??:??:?? 1 Read RTC time as 1
DEBUG | ??:??:?? 1 Setting 37 to output.
E (1326) gpio: GPIO can only be used as input mode
[ 1337][E][esp32-hal-gpio.c:130] __pinMode(): GPIO config failed
E (1327) gpio: gpio_set_level(226): GPIO output gpio_num error
INFO | ??:??:?? 1 Setting GPS power=1
E (1344) gpio: gpio_set_level(226): GPIO output gpio_num error
DEBUG | ??:??:?? 1 GPS powerdown using GPS_EN_ACTIVE
E (1355) gpio: gpio_set_level(226): GPIO output gpio_num error
DEBUG | ??:??:?? 1 WANT GPS=1
INFO | ??:??:?? 1 Setting GPS power=1
E (1367) gpio: gpio_set_level(226): GPIO output gpio_num error
DEBUG | ??:??:?? 1 Using GPIO36 for GPS RX
DEBUG | ??:??:?? 1 Using GPIO33 for GPS TX
DEBUG | ??:??:?? 1 NeighborInfoModule is disabled
INFO | ??:??:?? 1 External Notification Module Disabled
INFO | ??:??:?? 1 Turning on screen
DEBUG | ??:??:?? 1 Module wants a UI Frame
DEBUG | ??:??:?? 1 RF95Interface(cs=18, irq=26, rst=14, busy=35)
INFO | ??:??:?? 1 Starting meshradio init...
DEBUG | ??:??:?? 1 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=0, time 231 ms
DEBUG | ??:??:?? 1 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=253, time 2115 ms
INFO | ??:??:?? 1 Radio freq=869.525, config.lora.frequency_offset=0.000
INFO | ??:??:?? 1 Set radio: region=EU_868, name=LongFast, config=0, ch=0, power=27
INFO | ??:??:?? 1 Radio myRegion->freqStart -> myRegion->freqEnd: 869.400024 -> 869.650024 (0.250000 mhz)
INFO | ??:??:?? 1 Radio myRegion->numChannels: 1 x 250.000kHz
INFO | ??:??:?? 1 Radio channel_num: 1
INFO | ??:??:?? 1 Radio frequency: 869.525024
INFO | ??:??:?? 1 Slot time: 42 msec
INFO | ??:??:?? 1 Set radio: final power level=20
DEBUG | ??:??:?? 1 Current limit set to 100.000000
DEBUG | ??:??:?? 1 Current limit set result 0
INFO | ??:??:?? 1 RF95 init result 0
INFO | ??:??:?? 1 Frequency set to 869.525024
INFO | ??:??:?? 1 Bandwidth set to 250.000000
INFO | ??:??:?? 1 Power output set to 20
INFO | ??:??:?? 1 RF95 Radio init succeeded, using RF95 radio
INFO | ??:??:?? 1 Not using WIFI
DEBUG | ??:??:?? 1 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=237, time 2000 ms
DEBUG | ??:??:?? 1 LoRA bitrat3▒▒▒▒r▒▒▒▒▒▒▒ѕ́/ sec
INFO | ??:??:?? 1 PowerFSM init, USB power=1
DEBUG | ??:??:?? 1 Enter state: BOOT
[ 1580][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 320 / 4 = 80 Mhz, APB: 80000000 Hz
DEBUG | ??:??:?? 1 [Power] Battery: usbPower=0, isCharging=0, batMv=3100, batPct=0
DEBUG | ??:??:?? 1 [Screen] Screen: Started...
DEBUG | ??:??:?? 1 [GPS] Probing for GPS at 9600
WARN | ??:??:?? 4 [GPS] Failed to find UBlox & MTK GNSS Module using baudrate 9600
INFO | ??:??:?? 4 [RangeTestModule] Range Test Module - Disabled
INFO | ??:??:?? 4 [PowerFSM] Loss of power in Powered
INFO | ??:??:?? 4 [PowerFSM] Loss of power in Powered
INFO | ??:??:?? 4 [PowerFSM] Initialise the NimBLE bluetooth module
DEBUG | ??:??:?? 5 [PowerFSM] Enter state: ON
DEBUG | ??:??:?? 6 [GPS] Probing for GPS at 4800
DEBUG | ??:??:?? 6 [GPS] Setting Baud to 4800
INFO | ??:??:?? 6 [GPS] BLE authentication complete
WARN | ??:??:?? 8 [GPS] Failed to find UBlox & MTK GNSS Module using baudrate 4800
INFO | ??:??:?? 8 [Screen] Done with boot screen...
DEBUG | ??:??:?? 8 [Screen] showing standard frames
DEBUG | ??:??:?? 8 [Screen] Showing 0 module frames
DEBUG | ??:??:?? 8 [Screen] Total frame count: 103
DEBUG | ??:??:?? 8 [Screen] Added modules. numframes: 0
DEBUG | ??:??:?? 8 [Screen] Finished building frames. numframes: 3
INFO | ??:??:?? 8 From Radio onread
INFO | ??:??:?? 8 To Radio onwrite
INFO | ??:??:?? 8 Client wants config, nonce=11
INFO | ??:??:?? 8 Starting API client config
INFO | ??:??:?? 8 From Radio onread
INFO | ??:??:?? 8 getFromRadio=STATE_SEND_MY_INFO
DEBUG | ??:??:?? 8 encoding toPhone packet to phone variant=3, 14 bytes
INFO | ??:??:?? 8 From Radio onread
INFO | ??:??:?? 8 getFromRadio=STATE_SEND_METADATA
DEBUG | ??:??:?? 8 encoding toPhone packet to phone variant=13, 30 bytes
INFO | ??:??:?? 9 From Radio onread
INFO | ??:??:?? 9 getFromRadio=STATE_SEND_NODEINFO
INFO | ??:??:?? 9 nodeinfo: num=0xc999a000, lastseen=0, id=!c999a000, name=Meshtastic a000
DEBUG | ??:??:?? 9 encoding toPhone packet to phone variant=4, 69 bytes
INFO | ??:??:?? 9 From Radio onread
INFO | ??:??:?? 9 getFromRadio=STATE_SEND_NODEINFO
INFO | ??:??:?? 9 nodeinfo: num=0xe0d392b0, lastseen=0, id=!e0d392b0, name=bit.ly/mesh_dRH5#Robert@Home
DEBUG | ??:??:?? 9 encoding toPhone packet to phone variant=4, 69 bytes
INFO | ??:??:?? 9 From Radio onread
INFO | ??:??:?? 9 getFromRadio=STATE_SEND_NODEINFO
INFO | ??:??:?? 9 Done sending nodeinfos
INFO | ??:??:?? 9 getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 9 encoding toPhone packet to phone variant=10, 13 bytes
INFO | ??:??:?? 9 From Radio onread
INFO | ??:??:?? 9 getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 9 encoding toPhone packet to phone variant=10, 6 bytes
INFO | ??:??:?? 9 From Radio onread
INFO | ??:??:?? 9 getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 9 encoding toPhone packet to phone variant=10, 6 bytes
INFO | ??:??:?? 9 From Radio onread
INFO | ??:??:?? 9 getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 9 encoding toPhone packet to phone variant=10, 6 bytes
INFO | ??:??:?? 10 From Radio onread
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 10 encoding toPhone packet to phone variant=10, 6 bytes
DEBUG | ??:??:?? 10 [GPS] Probing for GPS at 38400
DEBUG | ??:??:?? 10 [GPS] Setting Baud to 38400
INFO | ??:??:?? 10 [GPS] From Radio onread
INFO | ??:??:?? 10 [GPS] getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 10 [GPS] encoding toPhone packet to phone variant=10, 6 bytes
INFO | ??:??:?? 10 [GPS] From Radio onread
INFO | ??:??:?? 10 [GPS] getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 10 [GPS] encoding toPhone packet to phone variant=10, 6 bytes
INFO | ??:??:?? 11 [GPS] From Radio onread
INFO | ??:??:?? 11 [GPS] getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 11 [GPS] encoding toPhone packet to phone variant=10, 6 bytes
INFO | ??:??:?? 11 [GPS] From Radio onread
INFO | ??:??:?? 11 [GPS] getFromRadio=STATE_SEND_CONFIG
DEBUG | ??:??:?? 11 [GPS] encoding toPhone packet to phone variant=5, 9 bytes
INFO | ??:??:?? 11 [GPS] From Radio onread
INFO | ??:??:?? 11 [GPS] getFromRadio=STATE_SEND_CONFIG
DEBUG | ??:??:?? 11 [GPS] encoding toPhone packet to phone variant=5, 22 bytes
INFO | ??:??:?? 11 [GPS] From Radio onread
INFO | ??:??:?? 11 [GPS] getFromRadio=STATE_SEND_CONFIG
DEBUG | ??:??:?? 11 [GPS] encoding toPhone packet to phone variant=5, 17 bytes
INFO | ??:??:?? 12 [GPS] From Radio onread
INFO | ??:??:?? 12 [GPS] getFromRadio=STATE_SEND_CONFIG
DEBUG | ??:??:?? 12 [GPS] encoding toPhone packet to phone variant=5, 29 bytes
INFO | ??:??:?? 12 [GPS] From Radio onread
INFO | ??:??:?? 12 [GPS] getFromRadio=STATE_SEND_CONFIG
DEBUG | ??:??:?? 12 [GPS] encoding toPhone packet to phone variant=5, 9 bytes
INFO | ??:??:?? 12 [GPS] From Radio onread
INFO | ??:??:?? 12 [GPS] getFromRadio=STATE_SEND_CONFIG
DEBUG | ??:??:?? 12 [GPS] encoding toPhone packet to phone variant=5, 19 bytes
INFO | ??:??:?? 12 [GPS] From Radio onread
INFO | ??:??:?? 12 [GPS] getFromRadio=STATE_SEND_CONFIG
DEBUG | ??:??:?? 12 [GPS] encoding toPhone packet to phone variant=5, 10 bytes
INFO | ??:??:?? 12 [GPS] From Radio onread
INFO | ??:??:?? 12 [GPS] getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 12 [GPS] encoding toPhone packet to phone variant=9, 60 bytes
WARN | ??:??:?? 12 [GPS] Failed to find UBlox & MTK GNSS Module using baudrate 38400
INFO | ??:??:?? 12 From Radio onread
INFO | ??:??:?? 12 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 12 encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 13 From Radio onread
INFO | ??:??:?? 13 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 13 encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 13 From Radio onread
INFO | ??:??:?? 13 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 13 encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 13 From Radio onread
INFO | ??:??:?? 13 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 13 encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 13 [Screen] From Radio onread
INFO | ??:??:?? 13 [Screen] getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 13 [Screen] encoding toPhone packet to phone variant=9, 13 bytes
INFO | ??:??:?? 14 From Radio onread
INFO | ??:??:?? 14 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 14 encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 14 From Radio onread
INFO | ??:??:?? 14 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 14 encoding toPhone packet to phone variant=9, 4 bytes
DEBUG | ??:??:?? 14 [GPS] Probing for GPS at 57600
DEBUG | ??:??:?? 14 [GPS] Setting Baud to 57600
INFO | ??:??:?? 14 [GPS] From Radio onread
INFO | ??:??:?? 14 [GPS] getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 14 [GPS] encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 15 [GPS] From Radio onread
INFO | ??:??:?? 15 [GPS] getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 15 [GPS] encoding toPhone packet to phone variant=9, 7 bytes
INFO | ??:??:?? 15 [GPS] From Radio onread
INFO | ??:??:?? 15 [GPS] getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 15 [GPS] encoding toPhone packet to phone variant=9, 12 bytes
INFO | ??:??:?? 15 [GPS] From Radio onread
INFO | ??:??:?? 15 [GPS] getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 15 [GPS] encoding toPhone packet to phone variant=9, 8 bytes
INFO | ??:??:?? 15 [GPS] From Radio onread
INFO | ??:??:?? 15 [GPS] getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 15 [GPS] encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 16 [GPS] From Radio onread
INFO | ??:??:?? 16 [GPS] getFromRadio=STATE_SEND_COMPLETE_ID
DEBUG | ??:??:?? 16 [GPS] encoding toPhone packet to phone variant=7, 2 bytes
INFO | ??:??:?? 16 [GPS] From Radio onread
INFO | ??:??:?? 16 [GPS] getFromRadio=STATE_SEND_PACKETS
DEBUG | ??:??:?? 16 [GPS] encoding toPhone packet to phone variant=11, 6 bytes
INFO | ??:??:?? 16 [GPS] From Radio onread
WARN | ??:??:?? 17 [GPS] Failed to find UBlox & MTK GNSS Module using baudrate 57600
DEBUG | ??:??:?? 19 [GPS] Probing for GPS at 115200
DEBUG | ??:??:?? 19 [GPS] Setting Baud to 115200
WARN | ??:??:?? 21 [GPS] Failed to find UBlox & MTK GNSS Module using baudrate 115200
DEBUG | ??:??:?? 21 [Power] Battery: usbPower=0, isCharging=0, batMv=4150, batPct=97
INFO | ??:??:?? 22 To Radio onwrite
DEBUG | ??:??:?? 22 PACKET FROM PHONE (id=0xd3e8f201 fr=0x00 to=0x00, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 priority=70)
DEBUG | ??:??:?? 22 Enqueued local (id=0xd3e8f201 fr=0x00 to=0x00, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 priority=70)
DEBUG | ??:??:?? 22 [Router] Add packet record (id=0xd3e8f201 fr=0x00 to=0x00, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 priority=70)
DEBUG | ??:??:?? 22 [Router] handleReceived(REMOTE) (id=0xd3e8f201 fr=0x00 to=0x00, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 priority=70)
DEBUG | ??:??:?? 22 [Router] Module 'Admin' wantsPacket=1
INFO | ??:??:?? 22 [Router] Received Admin from=0x0, id=0xd3e8f201, portnum=6, payloadlen=3
INFO | ??:??:?? 22 [Router] Shutdown in 5 seconds
DEBUG | ??:??:?? 22 [Router] Module 'Admin' considered
DEBUG | ??:??:?? 22 [Router] Module 'routing' wantsPacket=1
INFO | ??:??:?? 22 [Router] Received routing from=0x0, id=0xd3e8f201, portnum=6, payloadlen=3
DEBUG | ??:??:?? 22 [Router] Routing sniffing (id=0xd3e8f201 fr=0x00 to=0x00, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 priority=70)
DEBUG | ??:??:?? 22 [Router] Initial packet id 2016042801, numPacketId 4294967295
DEBUG | ??:??:?? 22 [Router] Enqueued local (id=0x782a5f33 fr=0x00 to=0x00, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d3e8f201 priority=120)
DEBUG | ??:??:?? 22 [Router] Module 'routing' considered
DEBUG | ??:??:?? 22 [Router] Rx someone rebroadcasting for us (id=0x782a5f33 fr=0x00 to=0x00, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d3e8f201 priority=120)
DEBUG | ??:??:?? 22 [Router] didn't find pending packet
DEBUG | ??:??:?? 22 [Router] Add packet record (id=0x782a5f33 fr=0x00 to=0x00, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d3e8f201 priority=120)
DEBUG | ??:??:?? 22 [Router] handleReceived(REMOTE) (id=0x782a5f33 fr=0x00 to=0x00, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d3e8f201 priority=120)
DEBUG | ??:??:?? 22 [Router] Module 'canned' wantsPacket=1
DEBUG | ??:??:?? 22 [Router] showing standard frames
DEBUG | ??:??:?? 22 [Router] Showing 0 module frames
DEBUG | ??:??:?? 22 [Router] Total frame count: 103
DEBUG | ??:??:?? 22 [Router] Added modules. numframes: 0
DEBUG | ??:??:?? 22 [Router] Finished building frames. numframes: 3
DEBUG | ??:??:?? 22 [Router] Module 'canned' considered
DEBUG | ??:??:?? 22 [Router] Module 'routing' wantsPacket=1
INFO | ??:??:?? 22 [Router] Received routing from=0xc999a000, id=0x782a5f33, portnum=5, payloadlen=2
DEBUG | ??:??:?? 22 [Router] Routing sniffing (id=0x782a5f33 fr=0x00 to=0x00, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d3e8f201 priority=120)
DEBUG | ??:??:?? 22 [Router] Received an ack for 0xd3e8f201, stopping retransmissions
DEBUG | ??:??:?? 22 [Router] Delivering rx packet (id=0x782a5f33 fr=0x00 to=0x00, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d3e8f201 priority=120)
DEBUG | ??:??:?? 22 [Router] Update DB node 0xc999a000, rx_time=0
DEBUG | ??:??:?? 22 [Router] Forwarding to phone (id=0x782a5f33 fr=0x00 to=0x00, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d3e8f201 priority=120)
DEBUG | ??:??:?? 22 [Router] Module 'routing' considered
INFO | ??:??:?? 22 Telling client we have new packets 3
INFO | ??:??:?? 22 BLE notify fromNum
DEBUG | ??:??:?? 22 [Screen] showing shutdown screen
DEBUG | ??:??:?? 22 [Screen] showing shutdown screen
INFO | ??:??:?? 22 [Screen] From Radio onread
INFO | ??:??:?? 22 [Screen] getFromRadio=STATE_SEND_PACKETS
DEBUG | ??:??:?? 22 [Screen] showing shutdown screen
DEBUG | ??:??:?? 22 [Screen] encoding toPhone packet to phone variant=11, 12 bytes
DEBUG | ??:??:?? 22 [Screen] showing shutdown screen
INFO | ??:??:?? 22 [Screen] From Radio onread
DEBUG | ??:??:?? 22 [Screen] showing shutdown screen
INFO | ??:??:?? 22 [Screen] getFromRadio=STATE_SEND_PACKETS
DEBUG | ??:??:?? 22 [Screen] phone downloaded packet (id=0x782a5f33 fr=0x00 to=0x00, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d3e8f201 priority=120)
DEBUG | ??:??:?? 22 [Screen] showing shutdown screen
DEBUG | ??:??:?? 22 [Screen] encoding toPhone packet to phone variant=2, 34 bytes
DEBUG | ??:??:?? 22 [Screen] showing shutdown screen
DEBUG | ??:??:?? 22 [Screen] showing shutdown screen
INFO | ??:??:?? 22 [Screen] From Radio onread
DEBUG | ??:??:?? 22 [Screen] showing shutdown screen
DEBUG | ??:??:?? 23 [Screen] showing shutdown screen
DEBUG | ??:??:?? 23 [GPS] Probing for GPS at 9600
DEBUG | ??:??:?? 23 [GPS] Setting Baud to 9600
WARN | ??:??:?? 26 [GPS] Failed to find UBlox & MTK GNSS Module using baudrate 9600
DEBUG | ??:??:?? 26 [Screen] showing shutdown screen
DEBUG | ??:??:?? 27 [Screen] showing shutdown screen
INFO | ??:??:?? 27 Shutting down from admin command
INFO | ??:??:?? 27 Shutting down
INFO | ??:??:?? 27 Entering deep sleep forever
INFO | ??:??:?? 27 Disable bluetooth until reboot
INFO | ??:??:?? 27 BLE disconnect
E NimBLEAdvertising: Error enabling advertising; rc=30,
INFO | ??:??:?? 27 Turning off screen
INFO | ??:??:?? 27 Saving /prefs/db.proto
INFO | ??:??:?? 27 Saving /prefs/config.proto
INFO | ??:??:?? 28 Saving /prefs/module.proto
INFO | ??:??:?? 29 Saving /prefs/channels.proto
INFO | ??:??:?? 29 Setting GPS power=0
DEBUG | ??:??:?? 29 GPS powerdown using GPS_EN_ACTIVE
E (29334) gpio: gpio_set_level(226): GPIO output gpio_num error
