firmware
firmware copied to clipboard
meshtastic
fancy T-Deck / SenseCAP Indicator / unPhone / PICOmputer-S3 TFT screen
nothing to see here, yet. Work in progress
Download firmware-2.5.4.dbf46f8.zip. This artifact will be available for 90 days from creation
Is possible to test on PICOmputer S3 ? I can send sample hardware.
To Germany? Good. I can support it when I have the actual hardware available. Currently (as of right now) it won't function as there is no cardKB-like keyboard input driver implemented which would be the precondition for any interaction, as the PICOmputer does not have a touch screen (or does the display have a GT911 or other touch controller??).
Is possible to test on PICOmputer S3 ? I can send sample hardware.
To Germany? Good. I can support it when I have the actual hardware available. Currently (as of right now) it won't function as there is no cardKB-like keyboard input driver implemented which would be the precondition for any interaction, as the PICOmputer does not have a touch screen.
worldwide, Germany is almost a neighbor, I'm from Slovakia. Picomputer use direct gpio matrix keyboard implemented by @caveman99 cpu is bpi-PicoW-S3 + RFM95 send my your postage address to [email protected]
I am on the road right now but iirc the picomputer does only have 4MB flash. May be a tight fit. The TFT tracksenger may be a better fit. 8 MB is the min for an integrated device I would think.
@mverch I have a picomputer prototype I can send you. Assuming @bobricius doesn't have a newer revision :-)
I ma not sure but on product page is: ESP32-S3R2 2MB Quad SPI PSRAM 8MB Quad SPI Flash Also I have Picomputer based on Wroom module which is more flexible with flash/psram options
I ma not sure but on product page is: ESP32-S3R2 2MB Quad SPI PSRAM 8MB Quad SPI Flash Also I have Picomputer based on Wroom module which is more flexible with flash/psram options
That's also what I read on the ALI-Express page for the Banana-Pi. Should be fine.
https://github.com/meshtastic/firmware/blob/tft-gui-work/boards/bpi_picow_esp32_s3.json#L28
This is looking great. I've been running it on hardware on and off for a few weeks and even in the current state I'd say it's made the T-Deck far more usable (as a standalone device) than it was before. I'm very impressed with the progress so far and look forward to seeing the improvements.
Willing volunteer if you need anything tested or want specific feedback.
Downloaded and installed latest CI artifacts. Will report back with any issues/bugs I find.
This pull request has been mentioned on Meshtastic. There might be relevant details there:
https://meshtastic.discourse.group/t/some-noob-questions-after-being-on-the-mesh-a-couple-weeks/14026/6
