mean00
mean00
96 Mhz is for the GD32, with USB 128 Mhz is for STM32 without usb
Yes, STM32F103/GD32F103/GD32F303/GD32VF103 and hopefully soon CH32F103 i've updated the (in-progress) wiki Thank you
Hi It barely fits in 64k with the following (**DONT** USE GIT head, use the release, the git one use bigger smoothed fonts) - picolibc as you did - change...
If it is stuck at the end of calibration (i.e. when saving the values to flash) just retry It may work the 2nd time
Let me have a deeper look, i'll keep you posted
Does the attached binary work for you ? (it is ok for me, but the unit have more than 64kB of flash) You'll have to do the calibration twice, it...
Thanks Are you stuck on the message "Connect the 2 crocs and press ok" ? Just in case, the ok button is the one on the right, not the rotary...
if you can connect a swd debugger i'd be interested in having the backtrack
In short, you need to start pyOcd for example, have a arm aware gdb then do something like arm-none-eabi-gdb target extended-remote :3333 load xxxxxx.elf mon reset b deadEnd r If...
pyOcd should detect the stlinkv2 automatically, no configuration needed i think