RasPiArduino
RasPiArduino copied to clipboard
me-no-dev
Arduino Framework for RaspberryPI
Hi @me-no-dev. Is this project still known to work with recent arduino IDEs? I never used it until now, so I don't know if I got anything wrong. Also, my...
When compiling a simple code before generating a binary, I got an error on Arduino IDE: C:/SysGCC/Raspberry/bin/arm-linux-gnueabihf-ar: `u' modifier ignored since `D' is the default (see `U')  Could you...
Hi everyone After running through the installation tutorial i was compiling code with enabled verbose output in the Arduino IDE and in the end i got the error: 'Unable to...
On the basis of https://github.com/me-no-dev/RasPiArduino/pull/69 I added Rasberry PI model 3b+ (revision: A020D3). I tested it on my local setup successfully.
Hi guys, when I try to compile, I'm getting this error: ```Arduino: 1.8.8 (Linux), Board: "RaspberryPI B+/2, Disabled, Disabled" /opt/arduino-1.8.8/arduino-builder -dump-prefs -logger=machine -hardware /opt/arduino-1.8.8/hardware -tools /opt/arduino-1.8.8/tools-builder -tools /opt/arduino-1.8.8/hardware/tools/avr -built-in-libraries /opt/arduino-1.8.8/libraries...
I am a bit confused: which Windows toolchain am I today supposed to install if I use current Raspbian Stretch on a RasPi3 Zero or a RasPi3 a+? Is raspberry-gcc.3.0.-r3.exe...
Hi, I'd like to send and receive commands via USB Serial from the Raspberry Pi to a Arduino Uno. the Arduino is using /dev/ttyACM0 but i don't know how make...
My sketch compiles once, then I get the following error: ``` Arduino: 1.8.5 (Linux), Board: "RaspberryPI B+/2, Enabled, Disabled" Warning: Board mighty-1284p:mighty-1284p:mighty_opt8 doesn't define a 'build.board' preference. Auto-set to: MIGHTY-1284P_MIGHTY_OPT8...
Hi, I hope someone may help with this issue. I have a RTC and I want Raspbian keep it update automatically polling NTP, if I run a sketch 24/24h that...
