Mark Deneen

I started running into this as well. I had to remove the device from the VM, add it again, and restart the RAVEn integration.

I hear you, but I have the same behavior with 1, 5, 10, 20, 30, 40, 50, and 60. At 60, it does this: clock: 60000000 Hz actual clock: 57142857...

> Additionally, you have captured the throughput one side, what about reverse direction? Would these be show in the logs on the host side? If so they looked nearly identical...

> Considering -84 errors, Did you check the external pull-up register requirements from [porting guide](https://github.com/espressif/esp-hosted/blob/master/esp_hosted_ng/docs/porting_guide.md)? Yes, we have pull-ups

I understand. Here is esp -> host @50MHz: ``` I (19084) stats: 16-17 sec 31372.00 kbits/sec I (20084) stats: 17-18 sec 32683.00 kbits/sec I (21084) stats: 18-19 sec 33120.00 kbits/sec...

You've probably seen this as well, but the 6.6 kernel also spits out a warning when the spi driver is removed. It says something along the lines of "WARNING: Flushing...