[refine] Client - configuration

[mdabrowski1990]

Requires

#78 #5 #96

Description

As a user, I would like to set all communication parameters on client side, so I can reuse them during communication instead of providing them over and over again.

Client configuration includes:

• DeltaP2request, DeltaP2response, DeltaP6request, DeltaP6response,
  • min value = 0
  • actual value - set by user
• DeltaP2
  • actual value = DeltaP2request + DeltaP2response
• DeltaP6
  • actual value = DeltaP6request + DeltaP6response
• P2server
  • max value = 50ms by default, but can be changed by the user
• P2client
  • min value = P2server_max + DeltaP2
  • actual value - set by user
• P6client
  • min value = P2server_max + DeltaP6
  • actual value - set by user
• P2*client
  • min value = P2*server_max + DeltaP2response
  • actual value - set by user
• P6*client
  • min value = P2*server_max + DeltaP6response
  • actual value - set by user
• P3Client_phys, P3Client_func
  • min value = P2server_max + DeltaP2
  • actual value - set by user

User is unable to set invalid values, e.g.:

• User cannot set any value below 0.
• User cannot set any actual value below min or above max.
• User is warned and actual value is adjusted if user just influenced min/max value and actual value is no longer in range.

Test Strategy

Unit Tests:

• 100% decisions coverage for implemented code

Acceptance Criteria

• It is possible to adjust all Client's parameters that are not constant values, even after the object is created.
• All Client's communication parameters are described in knowledge base.
• User documentation is updated with client configuration examples and explanation.