libusbk
libusbk copied to clipboard
mcuee
kList hangs Mi Wireless Mouse with libusb0.sys filter driver attached to the USB receiver
Device: Mi Bluetooth/Wireless dual mode Wireless Mouse, with USB receiver, so working as a USB wireless mouse Driver: libusb0.sys 1.2.7.3 filter driver attached to the USB receiver Windows 10 64bit
kList works fine, but then the mouse will not work after running KList. I need to remove the filter driver in order for the mouse to work again.
C:\libusbK-dev-kit> .\kList.exe
Loading USB ID's maintained by Stephen J. Gowdy <[email protected]>..
1. USB Serial Converter (FTDI) [Connected]
Service : FTDIBUS
ClassGUID : {36FC9E60-C465-11CF-8056-444553540000}
DeviceID : USB\VID_0403&PID_6001\FTDCRPIE
DeviceInterfaceGUID : {F9F3FF14-AE21-48A0-8A25-8011A7A931D9}
SymbolicLink : \\?\usb#vid_0403&pid_6001#ftdcrpie#{f9f3ff14-ae21-48a0-8a25-8011a7a931d9}
DevicePath : \\.\libusb0-0001
SerialNumber : FTDCRPIE
BusNumber : 0
DeviceAddress : 2
2. USB Input Device ((Standard system devices)) [Connected]
Service : HidUsb
ClassGUID : {745A17A0-74D3-11D0-B6FE-00A0C90F57DA}
DeviceID : USB\VID_2717&PID_5013\5&E9F3E45&0&1
DeviceInterfaceGUID : {F9F3FF14-AE21-48A0-8A25-8011A7A931D9}
SymbolicLink : \\?\usb#vid_2717&pid_5013#5&e9f3e45&0&1#{f9f3ff14-ae21-48a0-8a25-8011a7a931d9}
DevicePath : \\.\libusb0-0002
SerialNumber : 5&E9F3E45&0&1
BusNumber : 0
DeviceAddress : 1
Select device (1-2) :2
Loading driver api..
Getting descriptors..
-Device:
bLength :18
bDescriptorType :0x01
bcdUSB :0x0110
bDeviceClass :0x00 (Defined at Interface level)
bDeviceSubClass :0x00
bDeviceProtocol :0x00
bMaxPacketSize0 :64
idVendor :0x2717 (Xiaomi Inc.)
idProduct :0x5013
bcdDevice :0x0625
iManufacturer :1 (MI)
iProduct :2 (Mi Wireless Mouse)
iSerialNumber :0
bNumConfigurations :1
!End Device
-Configuration:
bLength :9
bDescriptorType :0x02
wTotalLength :34
bNumInterfaces :1
bConfigurationValue :0x01
iConfiguration :0
bmAttributes :0xA0 (Self-Powered)
MaxPower :50 (100ma)
-Interface:
bLength :9
bDescriptorType :0x04
bInterfaceNumber :0x00
bAlternateSetting :0x00
bNumEndpoints :1
bInterfaceClass :0x03 (Human Interface Device)
bInterfaceSubClass :0x01 (Boot Interface Subclass)
bInterfaceProtocol :0x02 (Mouse)
iInterface :0
-Hid:
bLength :9
bDescriptorType :0x21
bcdHID :0x0110
bCountry :0x00 (Not supported)
bNumDescriptors :1
-Report:
bReportType :0x22
wReportLength :215
Usage Page :0x01 (Generic Desktop Controls)
Usage :0x002 (Mouse)
*Collection :0x01 (Application)
Usage :0x001 (Pointer)
*Collection :0x00 (Physical)
Report ID :0x01
Usage Page :0x09 (Buttons)
Usage Minimum :0x01
Usage Maximum :0x05
Logical Minimum :0x00
Logical Maximum :0x01
Report Count :0x05
Report Size :0x01
Input :0x02
Report Count :0x01
Report Size :0x03
Input :0x01
Usage Page :0x01 (Generic Desktop Controls)
Usage :0x030 (Direction-X)
Usage :0x031 (Direction-Y)
Logical Minimum :0x8000
Logical Maximum :0x7FFF
Report Size :0x10
Report Count :0x02
Input :0x06
!End Collection
*Collection :0x00 (Physical)
Usage Page :0x01 (Generic Desktop Controls)
Usage :0x038 (Wheel)
Logical Minimum :0x81
Logical Maximum :0x7F
Report Size :0x08
Report Count :0x01
Input :0x06
!End Collection
*Collection :0x00 (Physical)
Usage Page :0x0C (Consumer)
Usage :0x238 (AC Pan)
Report Count :0x01
Report Size :0x08
Logical Minimum :0x81
Logical Maximum :0x7F
Input :0x06
!End Collection
!End Collection
Usage Page :0xFF01 (Generic Desktop Controls)
Usage :0x000 (Undefined)
*Collection :0x01 (Application)
Report ID :0x02
Usage :0x000 (Undefined)
Logical Minimum :0x00
Logical Maximum :0x00FF
Report Size :0x08
Report Count :0x07
Input :0x02
!End Collection
Usage Page :0x0C (Consumer)
Usage :0x001 (Consumer Control)
*Collection :0x01 (Application)
Report ID :0x05
Logical Minimum :0x00
Logical Maximum :0x023C
Usage Minimum :0x00
Usage Maximum :0x023C
Report Size :0x10
Report Count :0x01
Input :0x00
!End Collection
Usage Page :0x01 (Generic Desktop Controls)
Usage :0x080 (System Control)
*Collection :0x01 (Application)
Report ID :0x03
Usage Minimum :0x81
Usage Maximum :0x83
Logical Minimum :0x00
Logical Maximum :0x01
Report Count :0x03
Report Size :0x01
Input :0x02
Report Count :0x01
Report Size :0x05
Input :0x01
!End Collection
Usage Page :0xFFBC
Usage :0x88
*Collection :0x01 (Application)
Report ID :0x04
Report Count :0x01
Report Size :0x08
Logical Minimum :0x00
Logical Maximum :0x00FF
Usage Minimum :0x00
Usage Maximum :0x00FF
Input :0x00
!End Collection
Usage Page :0xFF02 (Simulation Controls)
Usage :0x002 (Automobile Simulation Device)
*Collection :0x01 (Application)
Report ID :0x06
Usage :0x002 (Automobile Simulation Device)
Logical Minimum :0x00
Logical Maximum :0x00FF
Report Size :0x08
Report Count :0x07
Feature :0x02
!End Collection
!End Report
!End Hid
-Endpoint:
bLength :7
bDescriptorType :0x05
bEndpointAddress :0x81
bmAttributes :0x03 (Interrupt)
wMaxPacketSize :8
bInterval :0x02
!End Interface
!End Configuration
Relevant discussion here.
- https://github.com/libusb/libusb/issues/1019
This may be a libusb0.sys filter driver issue with the paticular device. Take note there is no gurantee that libusb0.sys device filter (which functions as a upper filter) will work for all the USB devices.