dw1000

dw1000 copied to clipboard

tricks to increase transmission speed

3

Hello, i setup to use the DW1000 chip with a direct connection to RPi4. Chip is on EVB1000 board. I have 2 boards. Both configured for channel 7, cfg->rate 2,...

denevs

mcb30

TX data message failed: -22

16

Hi, I have cross-compiled your driver for a Yocto-linux embedded device (with no errors). However, when trying to send frames, I get an error (-22). Do you have an idea...

jonathanmuller

Not all SPI controllers seem to support DMA from data declared as "static const". Work around this problem by placing static data values either on the stack (for immediate spi_sync()...

mcb30

hi, linux kernal 4.9.x ptp_clock_info struct have no adjfine

justinleeyang