Raspberry-Pi-ITead-Studio-GPS-NEO-6M

Raspberry-Pi-ITead-Studio-GPS-NEO-6M copied to clipboard

pps

2

To enable the GPS as a pps source. Do the following. add "dtoverlay=pps-gpio,gpiopin=25" to a new line in /boot/config.txt add "pps-gpio" to a new line in /etc/modules install pps tools:...

jgarland79

Working with Raspbian Jessie and a Pi 3, version 1.2 (printed on the mother board). The core problem is that the GPS no longer attaches to ttyAMA0. With the introduction...

bkflynn

Raspberrypi 3

5

I followed your instructions and got them to work with an older B+ model but it didnt work on the raspberrypi 3. There I had to use the following (the...

thijstriemstra

GPS stops working when Camera is running

3

On raspberry pi 2 model B, when I start previewing the video though the official Raspberry Pi module, signal from the GPS Add-On disappears. Here is a repro video clip,...

alevchuk