fpv_custom_mods icon indicating copy to clipboard operation
fpv_custom_mods copied to clipboard

Published 20 hours ago • verified publisher icon mbilozub

No custom defaults after flashing

Open CleverOctopi opened this issue 3 years ago • 4 comments

After flashing STM32F7X2 4.2.8 to iFlight_F722_TwinG, it will not ask to apply custom defaults causing multiple issues

CleverOctopi avatar Jun 16 '21 18:06 CleverOctopi

Also just tried with 4.2.9 v.

CleverOctopi avatar Jun 16 '21 18:06 CleverOctopi

I'm sorry but I've never had a problem with this, I always have to ask if everything is done correctly.

2021-06-17 16-59-12

mbilozub avatar Jun 17 '21 14:06 mbilozub

I followed along to Bardwell's video, and it shows flashing to the generic board name and not the normal one I would use. Is this the correct way to do it?

CleverOctopi avatar Jun 17 '21 14:06 CleverOctopi

I followed along to Bardwell's video, and it shows flashing to the generic board name and not the normal one I would use. Is this the correct way to do it?

Not sure.. What you should do: Download the Firmware from the Git. Choose the Board from the Drop down menu Use "load firmware local" and choose the correct FC version from the file you downloaded. (F4,F7 etc.) Flash firmware. So the generic DJI patched firmware will be flashed with the specific board settings to your FC, which you have choosen in the dropdown menu.

Guili123 avatar Jun 21 '21 11:06 Guili123